Recent content by Nuke307

  1. Nuke307

    Any Firemen out there?

    
Just re read what you posted, there are no one way valves used on the threaded connections of the older scba cylinders so unless the thing is very new and the company built it without a purge valve you should be ok. The only thing I can think is happening is you left the purge valve open. once...
  2. Nuke307

    Any Firemen out there?

    also if you have the valve pictures above with the one way connection, that is just used for connecting the cylinder to the scba pack. You dont mess with that at all during the fill, just screw in the fill hose to the threaded connection on the bottle, make sure the purge valve is closed and...
  3. Nuke307

    Any Firemen out there?

    I wrote up a little procedure on how I fill my tank at my department. I'm not sure if your equipment is the same but hopefully you can make use of it. If your losing air during and after filling it sounds like you didn't close the purge(bleed) valve, it should be built into the system they have...
  4. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    
Adding a huggett would be interesting, this configuration is already very quiet. Far exceeded my expectations! I think this things quieter than my .22 Benjamin trail NP! Took the baffles off at the range and was MUCH louder, definitely wouldn't feel comfortable shooting in the back yard without...
  5. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    
No long case with mine, kind of wish it came with one but its not a huge deal to take it apart. Plus it makes it harder for me to justify not cleaning the barrel when I have to take it out to store it anyway lol
  6. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    
Im not sure if they sent all of this order out with fixed shroud. I had called and requested a fixed shroud when I made my initial order back in February.
  7. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    Ccame with it. Ill take some pics
  8. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    
Ill look into it! and I placed my order on February 5th, Its been a bit of a wait.
  9. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    I was going to try the heavy's but i tried to load the first one and it felt like I was pushing too hard to get the probe to push the pellet in, i ended up pulling the barrel off and using my cleaning rod to get that pellet out. didn't want to force it in and have it break something.
  10. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    regulator gauge looks to be around 125 but i have no way of knowing how precise it is.
  11. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    50 yard group 5 shots [S]
  12. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    groups at 100 yards. top is 5 shot group middle is 10 bottom was just to see how much i had to adjust. [S]
  13. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    Just took it out to 100.... incredible all 5 shots in the 2" circle. Will upload pictures later. Shooting straight from aoa 25.39 jsb could not be more happy with this gun!
  14. Nuke307

    Impact has arrived!! (well, most of it) And a factory fixed shroud!

    [S] There she is! packing up and heading to the range now!!