Recent content by Norcal

I was considering buying the Tuxing .7L bottle but went with the .58L. Tuxing lists the specs of the .58 as 62-63mm diameter and 310mm length. The .7 is 61.5mm diameter and 400mm length. By my measurements for my setup with the Huben Cricket Reg, the .7L bottle would extend .5 inches past the...

Nice work, Gongetit! When you get your bottle band tweaked to perfection, please send me the stl file as I am running the same bottle and Huben Cricket reg as you. My reg was creeping at first but seems to be settling in.

Took a utility knife and made an orientation mark pointing rearward towards one of the trigger group fasteners. Should make orienting the flat on the safety cylinder much easier next time.

Thanks, Dave. Man, took me at least 10 minutes of futzing with it before I got it back in the correct position. I did use a little dab of Blue Loctite on the tip of the screw threads so hopefully it won't happen again. Question - would putting an orientation mark on both the end of the silver...

Thanks but I've already tried removing the screw and repositioning the switch lever multiple times and it still won't fire.

Was out snuffing ground squirrels the other day and had my safety selector securing screw start to back out on me. The selector switch would not hold the position selected - flopping back/forth between safe & fire. Didn't have any allen wrenches with me but I was able to push/twist/tighten the...

Create a free account @ postimages.org, upload your photo there then you can easily get a link to share the hosted photo here.

Did the flip to my CS4 today. Very easy - trimmed a few inches off the return hose - fan wires were plenty long to rotate. Filled with straight distilled h2o and had leaks at a couple of the connections. Trimmed the end of one line and reconnected - no leaks! Tipped unit front/back & side to...

I sent the message below to both Gamo Spain and Daisy nearly two weeks ago. Guess neither one GAF as I have not received a reply back... Hello Air Gun Enthusiasts all across the United States and the World are wondering why both Crosman Premiere ,22 Caliber Hollow Point Pellets and Daisy...

Yeah, you got lucky. Anyone considering ordering from them should first search "Dack Outdoors Complaints"

Thanks NT - I will follow your advice & will keep a close eye on it. If it starts to push over 3625, I guess I will degas and adjust it down a bit.

Did a 4500psi bottle conversion on my Umarex Zelos using a Huben Cricket Regulator and seem to be experiencing the reg creeping. Mine seemed like it was initially set around 3100psi and is now up to 3500psi. Is this a common issue with Huben Regulators or is this just the regulator settling in?

Enjoy!

$495 shipped with no sales tax on the official GX Pump website using code GX10OFF - https://gxpumpofficial.com/collections/portable-pump/products/gx-e-cs4-pcp-air-compressor

Well, I guess neither Daisy or Gamo give a flying F as its been four solid days since I emailed both of them and I haven't heard a squeak back...