Norcal's latest activity

Here is latest iteration installed. I made this barrel/bottle band wider for increased stability.

Printing what I hope is my final version of barrel band medium and large as write this. Fingers crossed.

Thanks! I've been on a bit of a kick 3D printing stuff. If you've got a printer feel free to grab the files...

Hammer spring swapped, polished the barrel (JB then Flitz), replaced a busted chamber o-ring and 3D printed some nonsense:

Can you believe I'm leaving my Zelos .25 stock, I like it how it is stock, maybe down the road I might do the bottle conversion, but the...

I was considering buying the Tuxing .7L bottle but went with the .58L. Tuxing lists the specs of the .58 as 62-63mm diameter and 310mm...

Nice work, Gongetit! When you get your bottle band tweaked to perfection, please send me the stl file as I am running the same bottle...

Gave the zelos what she deserved from the factory hah. 1. Tuxing 580 cc bottle. 2. Huben regulator 3. Custom made pic rail and...

I have no opinion or experience with the Spanish version. But this post is enough to ensure I'll never buy any.

Took a utility knife and made an orientation mark pointing rearward towards one of the trigger group fasteners. Should make orienting...

LR Plinker and Norcal, Thanks for bringing this potential issue and the fix out. I'm a big fan of the AR grips that have a lid or cap...

Thanks, Dave. Man, took me at least 10 minutes of futzing with it before I got it back in the correct position. I did use a little dab...

You will need to loosen the safety scew enough to be able to rotate the safety cylinder in front of the trigger. Rotate it until you can...

I've never even touched a Zellos so I have no suggestion other than to look for a tear down video that shows the safety. It may give...

Thanks but I've already tried removing the screw and repositioning the switch lever multiple times and it still won't fire.