Recent content by Noose

Cocking didn't seal it up while filling but cocking/firing seemed to do the trick as the rifle is stable now. If it is leaking it is such a small amount as to be imperceptible over a couple of days. Replacing the o-rings in the AMP regulator was easy enough except for the actual tiny air...

The saga continues. I received a box of o-rings from the o-ring store. I bought every size my rifle uses that they carried or had in stock. It seems like The AMP, for now, isn't leaking or at least I can't yet tell. I created a new problem, though. I now have to assume that this rifle was...

Thanks, Patrick. I spent a few hours reading the fx dreamline basic diagram and ordered every oring that matched the basic. I hope it covers mine but I watched 910's video and my AMP is that exact model so I have all of them coming and since they had a 12 or so minimum, I ended up with a...

I just ordered up a bunch of Buna O-rings to give it a go after watching 910's video on youtube. It would have to be a completely blown out o-ring, though, as it is leaking so fast you can feel the jet of air blowing out of it.

I've read a dozen+ threads but I'm not seeing an answer. I replaced o-rings on my dreamline bullpup power plenum as it was leaking air after a complete degas. On assembly I noticed that the regulator had slipped toward the muzzle end slightly so I worked it backward with a 5mm wrench. I...

Back for a quick update for anyone else that might be following. I reached out to FX to see what they thought. They told me to make sure that the micro adjustment on the little slider was as far as it could go without stopping the power wheel and to turn up my regulator psi a small amount and...

Thanks, Patrick! I've been researching and can't seem to find it. It does appear that the bullpup .25 uses the same air tube as the dreamline classic but someone hopefully here will know. In looking at the various diagrams, I *think* it is probably a 23x2.5 but, wow, FX really needs to step...

Quick background - I bought a used FX dreamline bullpup and it was shooting quite a bit slower than FX told me it should based on stock, not even having a plenum, which it has. I ordered a new stock spring and a wika guage. I degassed by letting the main pressure gauge bleed off very slowly...

Thanks rappert! I've disassembled down to the spring. While it appears stock, there's no way to really know, is there?. Maybe I'll just order a stock spring to be sure. In order to remove the hammer weight, I'll need to remove the sear so I'll have to get to that when I get a bit more time...

I'd like to get a Wika - It seems there are a bunch of shapes/sizes as I google around. I'd like a black side/black face and obviously go to 250 with lines I can read instead of the one that is on it which doesn't have the granularity to get really exact measurements. Which one did you...

Thanks, Clifton. I'll just keep it the way it is, I guess and move to a lighter pellet. I have about 1K of the Kings to burn up and then I'll go that route. I didn't want to get into a bunch of tuning but I had hoped the .25 bullpup with a slightly longer barrel and the plenum would get me to...

Thanks - I'll look into replacing the gauge. Given I have the EXACT same FPS measurements at "150" vs "135" on the pressure gauge, wouldn't that make a difference if I was under-pressured at the regulator from it being off? My second comment and perhaps I'm wrong -- is there an internal hammer...

I purchased a used FX Dreamline .25 bullpup. As I received it, it was set at 150 on the regulator. It has the power plenum installed. The transfer on .25/30 is at max FPS on 4 on the power wheel. If I go up toward max, FPS drops off. If I go down from 4, it drops off. I backed the...

Thanks, I'll check it out. I'm still hoping to find a decent deal on a 50mm objective lens for the light gathering. I have a Japanese made Bausch on my .223 with a 50MM objective and it is extremely bright but I don't really want to take it off that rifle. I know that today Japan-made optics...

Thanks, I'm trying to stay under $300 and a larger objective for very low light. The furry little bastages that need dispatching come late and I'll have to use some kind of light or something to give me enough ambient to pop one hence the desire for a larger objective to gather more light. I...