nobody1's latest activity

A plenum may indeed be great but it costs $50+ for a $220 airgun.

I found the springs were cheap enough on AliExpress I bought 0.8, 1.0, 1.2, 1.4 and 1.5 wire in a bunch of different lengths. That way I...

I just "rediscovered" the Zelos over sprung problem. Decided to shoot 15.89 JSBs and wanted to tune down to around 900 fps. Dropped...

I know. My point was you can generate those numbers with WAYYYYYY less pressure. Even without the plenum. However, adding a plenum...

I am not about power with the Notos. It's supposed to be a small lightweight airgun. 800FPS with CPHP is plenty for hitting targets at...

I was getting 925 at 2200 /152bar. With CPHP. You need plenum volume. That's a poop ton of pressure on that gun, that's taking a lot...

I have found that the Carm magazines are the best. I have eight of them and have had not one single problem! I threw away my stock Notos...

I have both the Notos and PP750. I like both and the action is almost identical. I wish Notos came in .177 too.

The shroud and 9 baffles inside work well for the size. After the shroud holes are covered it gets even more quiet. With an additional...

There is also a muzzle brake that treads on the barrel with an o'ring to center the shroud. It has huge holes in it. I don't think that...

I have bought plenty of thread adapters from Aliexpress. I have 10-20 moderator adapters 1/2-20 to 1/2-28 and 1/2-28 to 1/2-20. I wish...

I've been buying a lot of smallish parts for a couple zany plenum ideas. No where else to buy the various adapters. People always...

But don't be too conservative, check the return policy, if it is good then go ahead and pull the trigger. Your money is protected...

I covered those holes with duct tape for now. I will probably wrap the entire shroud with something (carbon fiber wrap, etc) soon. I was...

So as far as I know SPA is the only manufacturer that puts holes in the rear shroud? My P15 & M16 have 2 rows & Bull Shark also. Now my...