nobody1's latest activity

523416 Why not test with a pellet? A projectile makes a difference in noise from the barrel. 1 mkre baffle in that IAmod would make it...

Got this little guy a few weeks ago and finally had the chance to miss with it. Out of the box nothing to write home about, trigger...

I concur, the latest BIG one is noticeably more quiet than the next best one! Subscriber also made a big 1/2UNF tesla valved moderator...

I will be on walkabout, without CAD, from the end of July to end of October 2025. So, if you need engineering help, I am not ignoring...

I have 2 Nova Liberty in action now and another one which I sold. I attached the schematic for the Nova Liberty.. If my Liberties...

Thank you nobody1. Very informative.

The knurled/wide ends are on top. Read my post which has lots of detail...

Yes, that is why I quoted the article in my post.

The info you provided was a shot string with a minimum and maximum FPS. There is not a single person on this planet who can make...

Without any information about the gun and projectile, I have zero input. If the gun isn’t regulated, you might be good. If you‘re...

@DoktorPotterR - I shoot cheap Crosman Premier Hollow Points 14.3 grains out of mine on power setting 3. I left my hammer spring where...

Transfer port goes long end up. I have bought several used and discounted 13xx's with people putting them in upside down and selling...

I am out of this forum. As soon as moderator 3 bans me. Good luck to the rest of you !

Moderator3 Moderator Staff member Feedback:9 / 0 / 0 Add Feedback Today at 6:38 PM nobody1, Your post (When moderators break easily)...

I am now using subscriber's Tesla Valve moderator for every airgun with a 1/2-20 adapter, at least 7-8 airguns so far, including a .22...