Recent content by Nnauerz

42

Im sorry if this has already been said jcote258, i usually get the same issue when setting the reg to high and not enough hammer spring tension. My beliefe is that if the hammer isnt hitting the valve hard enough to brake the stiction and it cant open consistantly. My experience is that 75 to...

When inside I just pick a spot on a blank peice of paper and make a hole with a pellet and then when that hole gets to big make another one in a different spot.

Mabey in the future nsa will offer a modified hollow point similar to this, I would imagine it would be as easy as modifying the die. Just would need a demand for it or enough people asking .

Does anyone know what they are coated with, mine feel sticky and foul up the barrel alot.

Do you have a part numbers for all three ? 

Just check mine also has the lighter hammer and the relief cut for the safety is different.

Wow that's a huge difference is the smaller one maybe meant for sub 12 ft lb. ?

I fixed mine by degassing the gun completely and loosening the front block pinch bolts and centered it up. now there is the same gap on both sides.

My Maverick Sniper shoots 23 grain .217 javelins at 968 fps with the reg set to just over 110 with a huma gauge not sure how accurate the gauge is but it does have a line for every 10 bar instead of every 50. only mod is the Huma dual hole transfer port. Also how can i tell if mine has the wrong...

I just checked mine and it looks like the regulator is turned slightly more to one side causing the clearance issue the rail looks straight. My bottle hasn't touched yet but its close. Thanks for the heads up.

What side should the cocking lever be on for right hand shooters? Wouldn’t it be harder to hold it by the grip and reach up to cock it with your left hand while shouldered in the field. Do you think they should design a model with the lever on the left for bench shooting only? Impact mark 3...