Nimrod's latest activity

What would be really good is: If Skout can publish a description of the operation of both regulators and how the internal parts function...

Now... if I can only get the HP reg to hold firm from full fill down to 2000Psi...I would be happy....not sure if anyone else with sub...

I figured this out already....but thank you :):):)

Actually, this issue and a couple loose screws are really the only issues that I’ve ever actually, this small issue and a couple loose...

Hey, I’m so sorry. I think I may have recommended the wrong O-ring. It’s the 008 not the 009 Here’s the link for the right one...

Try replacing the Oring that I mentioned above. you can order them on Amazon. here’s the link https://a.co/d/f2JWcQl I still think it’s...

Well...I decided to cover SK-OU7008 with lots of lubricant - hell of a lot more than I would do normally...and I got it working...well...

Thanks, but I replaced the entire HP without any luck!

Damn it...I spoke too soon. No the problem returned after turning the bottle on after it was turned off. Even with replacing the VRG 106...

Sounds like a good plan. Yes, the cylinders are the same on HW44's, HW110's & HW100's, so gauge and reg ends will interchange. The ends...

Thanks...but two questions; 1- can you leave the gauge that comes with the HW110 cylinder on? 2-Does the back end (regulator/action) of...

How to swap the HW44 cylinder with the HW100 one.? Does it simply means unscrewing the back end of the HW44 (regulator part) and fitting...

Pictures of my improved version butt stock mount using a UTG or Monstrum rail adapter on top # 1 stock fully collapsed #2 stock fully...

OK, I think I got it licked The problem is the choice of material and diameter of the VRG 106 (L.P) . This seal deforms over time, and...

I have just done another experiment. I removed the tiny cylindrical seal in the LP - basically to stop being a regulator/ zero air in...