nervoustrig's latest activity

AOA link: https://www.airgunsofarizona.com/precharged-pcp/rainson-draco-walnut/ Mfg's product listing...

I'm pretty minimalist. Cleaning barrels is almost always done with it on the rifle, using a pull-through, the gun either lying on a...

Yes sir, it's a shopmade lapping fixture. The faceplate has a small amount of adjustment to center up the rod to the barrel to keep it...

I used to have and use a conventional chronograph but I shot it one too many times. Now I use one of my cheap chinese chronographs...

Hmm, yeah that’s interesting. It seems to point away from potential movement of the barrel or shroud or scope. Unfortunately I don’t...

Turning down the OD in preparation for threading is likely the biggest challenge. If you have a sufficient level of DIY spirit, you can...

Oh wow, my assumption was we are talking a nuisance shift of a half inch or inch tops. Pretty safe to say 6 to 8 inches is not due to...

In the world of airguns, cold bore is a blanket term frequently used to encapsulate a variety of subtle factors having little to nothing...

Getting the 16.2gr .177 up to useful speeds from such a short barrel will require very high pressure. Probably beyond what the rifle is...

That’s the right idea but it’s easier said than done. If the free end has more than the slightest amount of play, you can try rocking...

Welcome to the Nation, glad to have you here. You've asked the question of the century, both camps firmly entrenched and ready to...

1720 got some love today. Set up to shoot Supermags just shy of 700fps. I do love the old elm 160 stock. The bipod is only for bench...

Efficiency expressed in units of fpe/ci.

Your markups of plateau and knee are indeed correct.

This behavior is generally caused by degradation of the regulator O-rings. They progressively harden and eventually fail to seal...