nervoustrig's latest activity

You’re pouring the molten lead onto a jag (or similar thing) at the end of a cleaning rod. After it has cooled, you apply abrasive to...

Hi @Ezana4CE, in case you hadn’t run across it yet, here’s a link to the thread where Dillon reworked the crown on his Taipan...

Considering how many funky extruded O-rings I’ve replaced over the years, I will freely admit my instincts were that an O-ring is likely...

I would place the odds of a mid-barrel choke being intentional at 1:1000. It represents an unnecessary complication in the production...

Good job! You, like me, get your money's worth out of your mini lathe! Ive seen that more than a couple times on factory threaded...

Swings and roundabouts, regs recover quicker with bigger pressure differential but also suffer more wear to the sealing surfaces and...

This is the setup we will be shooting at worlds for 50m unlimited. It works. 😀 Mike

Since you have an AT44, I'm gonna suggest you shoot HN pellets, or JSK KO slugs, even Zan slugs. I used to have both an AT44 177 pump...

Fill port check valve.

Many PCPs have a way to adjust hammer spring tension on the fly. Doing so will change valve lift and dwell to be more suited to lighter...

Well, it has been a lovely long weekend with a good blend of family and shop time. I'll open by saying I did not follow my original...

The most significant parameter for achieving power in a regulated PCP is almost always the size of the air passages (aka porting). And...

Hello everyone, I apologize for not posting here on the Forum sooner but due to some medical issues I have been preoccupied. At this...

10 shot group this evening with My Kalibrgun Cricket II Tactical 60 .22 Charlie Frear tuned airgun, laser measured to 50 yards. Shooting...

I am so sorry. This will be a darker place without him in it. Hoping that he rests in peace and that all those that loved him soon...