nervoustrig's latest activity
nervoustrig replied to the thread FX FX Impact M2, M3, M4 POI shift when installing moderator.For what it’s worth, my experience has been that even tensioned barrels and heavy walled barrels secured in the beefiest of...- nervoustrig reacted to boscoebrea's post in the thread cleaning: anything wrong with pushing wool pellets muzzle to breech? with
Like. I mean how simple is pullin patches through? - nervoustrig posted the thread Attempting to rescue a bad barrel - the SPA M25 in .35 cal in Barrels & Muzzle Devices.Well I finally got a chance to revisit the .35 cal SPA M25. It's been mothballed for a while....when I set it aside, it was still...
- nervoustrig reacted to Vetmx's post in the thread Tuning Jumping to conclusions. When knowledge, resources and ability are a curse. with Like. I believe the more you know doesn’t make you immune to getting spun. A new guy to a hobby gets spun over the things experienced guys...
- All that screw does is secure the gauge dial face. It's not holding air back. I'm not familiar with the Indy but I do know about the...
- Shot my USFT last weekend at its second match as a .20/Hunter class. This was at one of Garrett's monthly matches at Rio Salado. Been...
- Given the current state of airgun design, I really don't think there's a major difference between the two. There are plenty of HPA...
- These are a couple of my favorite “Cheapos”. With a little TLC they perform well above their price point. Kenny
- nervoustrig replied to the thread AEA AEA Threaded fill probe and Femal Foster Fitting compatibility.Just a suggestion based on my experience. I was in the habit of using a -010 O-ring in the female connector of my various fill whips...
- nervoustrig replied to the thread Beeman Qb 79 Pcp.Like Scott said, running a QB79 on air can be as simple as threading on a Ninja paintball tank. A good place to start is Bob’s...
- nervoustrig reacted to Hobbyman2007's post in the thread Any experience with Bore-Whips pull-through cleaning #42-0017 for .177? with Like. I use grass trimmer line in the green colour for .177 . Cut to right length, heat up one end with a lighter and flatten it out. Cut the...
- Burst disks flex every time the gun fills and empties. Over time this can fatigue the metal and the disk will rupture, even though the...
- Yeah, this sounds like a job for the Bridgeport. I suspect most of the wear in the hole is toward the rear and downward, where it would...
- nervoustrig replied to the thread Diana Diana mod 5 worn pivot.Agreed, a bushing is the best solution. Execution is key, of course...do your best to get the bushing centered on the original pivot...
- nervoustrig reacted to extradrygin2001's post in the thread Beeman How often do you pay an inflated price for a rifle or don't make such purchases at all, only buy good deals? with Haha. You don’t know that I don’t have it. Maybe I do, I have lots of stuff and spend way too much. Glad you where rude about though, that...
