Mycapt65's latest activity

Thanks Steve, that's a very appropriate response. I certainly didn't give it enough shots in this example to properly season or lead...

I'm still struggling to understand what's going on with the accuracy of this early Beeman 77. The wind was very light to non existent...

Well have to agree to disagree. Springs can be made reasonably consistent. Your experience with aftermarket springs is typical of...

They couldn't mass produce a guide fit as good as a custom fit, but they could easily mass produce one that fits well enough to reduce...

I’ve purchased 4 HW’s in the past 2 years (2 98’s, a 95, and 35E) and every one had annoying spring buzz. Don’t have the patience to...

I think you might mean Trenier. https://www.trenierairguns.com/ I've bought well over a 100 tins of JSB and H&Ns in three calibers...

So true on all accounts. Having been a Mercedes parts guy for two years and BMW tech for eleven years, I can tell you from lots of...

Your spring probably got bended a bit from use , when there's some bend in it there is less twang . But i don't understand why they...

I've worked on one or two.

There is plenty of .20 cal. pellets available now (now is the operative word here), however that wasn't the case six months ago or for...

My first HW50 was a .22 and it was the twangiest rifle I owned. The rifle has a very abrupt shot cycle when compared to others. I put...

A Hw50 22 shot cycle is usually a bit softer than a 177 Hw50. It is in most piston guns but it is a little more noticeable in the 50 for...

I find the front sight blade is way to thick , even @ 50 feet it is a least 3x wider than the bullseye , and this is on most guns . I...

I agree and disagree. A double link is more complex than a single one, typically takes a bit more effort due to decreased leverage, and...

One clack of the arm popping against the comp tube is normal as @MDriskill explained. The second pop sound is unusual since you havent...