muradtexas's latest activity

I guess I'll keep the current power set up and test for accuracy for now. If it works, it works; if it's not accurate enough, I'll play...

I have the 350 mm barrel in mine, and I settled on the .22 JSB 14.3 grain at 865 FPS with factory reg settings. This pellet gives good...

I wouldn't turn up HST then, only down.

I don't know what velocity it peaks at, but it was on 860fps, and I brought it down to 800. I'm not too familiar with Leshiy regulator...

Make sure you don't go above the first velocity peak. Have you figured that out yet? Once you do, I would recommend getting not going...

I'll take that into consideration. Maybe play with different spring tensions with .22 for now, see if the velocity gain is worth it.

I looked up an old .22/250mm tune. Huma reg at 95 bar. 240 bar fill. I got 25 shots averaging 720 FPS with the JSB 18.1 grain. I'm...

Hit reply to soon. Also want to comment that I believe you can achieve your goals with either caliber. If you prefer the trajectory...

I'm guessing the HP designation is to distinguish it from the shorter valve stem uses in the sub-12 kit. For a Leshiy Classic & a high...

Sold my Leshiy to a friend when I needed money, and now I got it back. I missed the damn thing. Now, I have 2 options: .25 and .22...

Good luck with your other projects.

I'm gonna postpone on that project for now, some other projects take priority for now. But I will get to it someday.