mubhaur's latest activity
mubhaur replied to the thread N/A Best PCP rifle.RAW HM1000X made by Martin- mubhaur reacted to Doc_pafumo's post in the thread RAW Rapid Size Belleville washer RAW HM1000x with
Like. Thanks so much! You totally saved my day. I’ve been searching for this for months and never thought of this solution - mubhaur reacted to Motorhead's post in the thread N/A Digital/Electronic PCPs - Brands besides Daystate and Skout? with Like. Mike at THOMAS did for a spell early on ... the BR mob protested enough to have them banned. Scott H uses his own design on his custom...
- mubhaur reacted to Vetmx's post in the thread FX [HELP] FX Impact M4 – Regulator Adjuster Pin Spinning Freely – Need to Replace Both Reg Parts with Like. In your top pic the adjuster is ready to be pulled out manually. There are no threads engaged because you unscrewed it until it spun...
- The bent valve rod thing is indeed an issue and a contributing factor in a gun thats real bad. This issue dates back to 2020 with even...
- Hello, I wanted to thank mubhaur for the new plenum piece. My m4 impact had to shoot about 15 times before having the adjustment I had...
- If you have done the process previous, have the correct tools, lapping compound & technique figured out ... YES If just reading about...
- mubhaur reacted to Motorhead's post in the thread RAW Rapid what material is the Raw HM1000x valve made of with Like. Seat is machined BRASS Poppet Stem is Stainless Poppet head is Acetal
- Hi Folks, I’ve been working for a while on solving the slow first shot issue in the FX DRS. I’ve done various tests and tried different...
- The simple answer: Buna-N in 70 durometer The longer answer... Static and dynamic O-rings carry different considerations and...
- Just plinkin' at 30 yards. Shots one and two after the .30 cal. LRT had been sitting for a while. I'll try 50 yard card split next!
- mubhaur replied to the thread FX Thank you Mr. Johan FX for sending me liners.These are 700mm liners. I understand that in most of FX guns, these can be used.
- Here's how I'm confident it's fake. Look at 0:27 into the video and freeze on the block. It reads: "Made in USA by FX" - highly...
- I wanted to try new liners with 1:16" twist rate. These were not available in my country. I wrote to Johan and he sent .22 and .25...
- I have started a few upgrades on my own Impact M4. A bit of increase in plenum volume due to removing material from valve housing...
