MSR Workshop's latest activity

Well…. Found a new tiny leak that I fixed. Didn’t know it was leaking there until it was bad enough that I noticed it and it wasn’t a...

Well, I got to do my first match today after sealing up the hole in the breach block. Looking fairly promising that I’d like to tighten...

Thanks for the info, i will clean the barrel thoroughly tomorrow and try again. Is'nt 810-815 too low for JTS .22 22.07gr ?? I will...

Yeah, since it’s a steel barrel, you’re not gonna hurt it with a brass brush. Now, if it’s the stock scout barrel, which is aluminum...

Thank you... i will do that because i have been putting alot of pellets through it in the last 2 days. I also have robla barrel cleaner...

So with a lothar Walter barrel I would try bumping your speed down to around 810 to 815. With my Lothar walther barrel that seems to be...

The JTS, though very accurate, tends to foul a barrel quickly. What kind of cleaning kit do you have?

Remind me again, which barrel you have?

So what was your extreme spread and standard deviation post regulator replacement?

Previously I had a descending shot string of 15-20 fps over 30 shots.

So enlarging the poppet head causes the valve to close a little faster what causes it to refill the Plenum faster? Or is that just...

On that note, I do have an interesting sound after a shot. It’s like a fill sound in the valve chamber. Would that have to do with the...

So happy to read the 2 little plugs I made up worked to seal up the poppet seat bipass leak :love: (y)

Thank you for the info. Saw your video, your gun looks amazing!I have been looking back on this thread, as it is the only source of info...

It adds a micro burst of air to your 1st shot, or when your rifle has been inactive for a set period of time. I believe this is to...