MSR Workshop's latest activity
MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.That looks really great !- MSR Workshop reacted to Tricky-Dicky's post in the thread Skout Everything Skout EVO and Epoch with
Like. Just been in the shed on the lathe and cleaned my adjusters up, much prefer the clean look, never did like the look of them, just didn't... - MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.It’s quite a few turns for not much change
- MSR Workshop reacted to Tricky-Dicky's post in the thread Skout Everything Skout EVO and Epoch with Like. Interesting, How much do you need to actually adjust the LP adjuster to say increase by 50psi? I tried mine, and it was very hard to...
- MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.I really felt like turning the LP up more did help. what is your HP set to? Before I recently did my transfer port modification my HP...
- MSR Workshop reacted to Motorhead's post in the thread Skout Everything Skout EVO and Epoch with Like. I just stuck cap in lathe and removed the knurling making a Flat top cap ;)
- MSR Workshop replied to the thread Skout Airguns Whisper moderator available now!.I have the Donnie FL Shogun that’s meant for a 30 caliber, but I also shoot it with my .177 and it’s very nice and backyard friendly...
- MSR Workshop reacted to Motorhead's post in the thread Skout Everything Skout EVO and Epoch with Like. For a dedicated .177 .... Seat at .220" and a transfer exit and path to barrel @ .150" should work really well. If valve is dwelling to...
- MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.So around 7 mm That’s pretty large. I only went up to 3.5 mm/ 0.1377 and I was able to turn my regulator down by over 1000 psi.
- MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.So how large did you open up the transfer port seat?
- MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.So I was wondering where you actually put those. So my question is what’s the point of choking the transfer port back down vs just...
- MSR Workshop reacted to manabeknives's post in the thread Skout Everything Skout EVO and Epoch with Like. ahhh... i have one of the loctite's that held up ..I probably need heat to get mine to separate
- MSR Workshop replied to the thread Skout Everything Skout EVO and Epoch.So I just spoke with Scout this morning and they said that they used to lock tight the two sections together But eventually, the Loctite...
- MSR Workshop reacted to manabeknives's post in the thread Skout Everything Skout EVO and Epoch with Like. I have broken too many pieces by "being gentle"...just ask Darryl ;) Currently, my Epoch is sealed and zero leaks, so i won't mess with...
- Pliers Wrench / Great Tool. Might could use keyless chuck from a drill.