monstr2's latest activity
- Mi don't have it in mm but 44.3 is (according to you) is just on the edge of lining up but if i convert it to inches seams way to far...
- Mmonstr2 reacted to heavy-impact's post in the thread I’ve located a leak on my FX Impact...where is the source??? (FIXED) with
Like. Only the trigger guard needs to be removed to unscrew the regulator. I wouldn't touch the rest of the gun unless there was another leak... - MYou can adjust the probe exactly to the right spot by rotating the reloader bar (part B19). It has left handed thread at the other end...
- Mmonstr2 reacted to Centercut's post in the thread Tuning How can a pin probe seat deeper than stock FX pellet probe? with Like. In order to line up the ports with the probe and the breech, the pellet probe must be set back like you said, 1 to 1.5mm. The pin...
- MRemove the pellet probe, and remove the barrel. Take your pellet probe and insert it into the barrel until the ports match up. Use a...
- M👆 👍 I haven't figured out any other method to check that the ports are lined up perfectly. I found a video of that, but it doesn't show...
- MNo, not in my experience. The probe stops moving forward a tad before the end of the forward cocking stoke of the cocking lever, before...
- MMost accurate air gun I have at ranges past 100 yards is my Panthera 25 with a 600mm barrel. Around here our ground squirrels are...
- Mmonstr2 reacted to wooferocau's post in the thread FX Fx impact m4, why did they got rid of 1st reg? with Like. Trying to be polite here...But after making that statement did your nose remain the same length ??
- MBusy making friends :D A friendly bit of advice. This isn’t reddit or X. Not everything is a dig against your judgment or an attack...
- MHere is a general thumb rule for Mildot reticles: If pellet is is flying in an initial speed of 850-880 fps and the scope is zeroed at...
- MLots of air rifles that can shoot decent groups at 100 yds. Big factors are, weather conditions, support equipment and form. The nut...
- MWhy continually come out with more barrels and different twist rates? Does FX have a tabulation on the best projectile and velocity for...
- MIt's like the guy in the video didn't even know the GK1 exists. It better be way under $1250 or what is the point, unless you are a FX...
- Mmonstr2 reacted to grzech2005's post in the thread FX New member- please help with my new fx dreamline lite 30 cal- i have ton of questions but no answers.. with Like. here it is but i must tell you this- i hate this gun so far! i don't know what those idiots at fx restricted on this gun but its not...