Recent content by MMoudk

  1. M

    ARGUS 60W Valve Help

    i dont change any part of gun, i just changed valve setting and regulator setting, tested valve with many moods and tested reg at 120-135-105 bar. with all of this setting i cannot get speed over 200 m/s. with same setting before i reached the 320 m/s. i dont know what happend to this gun...
  2. M

    How to remove ARGUS 60 Barrel and shroud

    How to remove ARGUS 60 Barrel and shroud? i opened all screws but still cannot open shroud and barrel.
  3. M

    ARGUS 60W Valve Help

    i did some changes in valve but now my speed cannot go over 180 m/s! i dont know why, reg pressure is 105 and also tested 120 bar.
  4. M

    ARGUS 60W Valve Help

    Hello can anyone help me and measure this distance that i marked? i did some change in this section but my accuracy was bad i want know to original distance of this part. thanks
  5. M

    Argus 60W .22 60FPE is possible?

    my argus cylinder is like yours. 38mm~38.12mm.
  6. M

    Argus 60W .22 60FPE is possible?

    cricket .22 pelnum works on ARGUS 60W? because my friend have cricket .22 pelnum but i dont know it is ok with argus or need new pelnum ?
  7. M

    Argus 60W .22 60FPE is possible?

    please explain more simple, thanks i am noob.
  8. M

    ARGUS 60 Slug Testing

    this is h&n 23gr 284-280 m/s groups at 50m. about 1.2 cm groups also it was winday day. and i recommend everyone clean h&n slug 3-4 times! it is very dirty slugs. also clean barrel before testing. i checked 21gr h&n slug and they are not good for my argus 60.
  9. M

    Argus 60W .22 60FPE is possible?

    Hello is it possible increase power of argus 55 fpe~60 fpe? currentlly i check my argus and with max hammer spring and 150 bar reg i got 45 fpe. also with 110 bar i got same result 45 fpe. what is your recommendation for tuning this gun? thanks
  10. M

    ARGUS 60 Slug Testing

    your Javelin slug is .218 or 0.217?
  11. M

    ARGUS 60 Slug Testing

    i know that argus with 150 bar reg max hammer setting can give me 325 m/s 18gr. also with 115 bar i can give 325 m/s! it is nice hammer spring, but what is reg job in argus60 ❗️😁?
  12. M

    ARGUS 60 Slug Testing

    17gr 270m/s 30m reg 115
  13. M

    ARGUS 60 Slug Testing

    very nice groups, i also tested some 17 grains but groups about 2cm in 30 meter. my reg pressure is 115 bar. i tested them from 290-260 m/s. what is your reg pressure? thanks
  14. M

    ARGUS 60 Slug Testing

    OK, today i tested 23GR .218 at 40meter and result was not good ~ about 10cm groups. reg at 115 bar and max hammer spring. about 60 joules. i decreased the speed but still result was not ok. but it is JSB Knockout .216 tests with 275 m/s speed. groups are very good but i had one flyers in...
  15. M

    Checking out the Goblin (EDgun Leshiy2)

    i hope see new l2 with slug shooting ability