Recent content by milanilo

the regulator is always 134 during first 10 shots of course during the shot it decreases to 127 but it comes back to 134 very fast

some says it’s normal for fx guns !! will its not cuz i am fx impact owner since version 1 and i still have 2 and 3 none of them have to be shot 10 times to regain velocity something wrong with m4 cuz the issue is not leaving the gun over night then this happen no ! i have this issue even...

hello so i have an issue regarding my M4 first 10 shots are lower fps by almost 80 fps then the gun shoots normally to my tuned fps ( 915 ) looks like it’s commonly issue with many m4 users . when the gun rests for couple hours i have to shoot almost 10 shots before it settles again any...

i have .22 and you are right with stock hammer i am limited to 135

My gun the facrory hammer is 5.9 gram

So I decided to change the factory hammer weight with huma 7.5 gram and solved the issue the facrory hammer is 5.9 gram

i started to question the hammer weight on M4 once i increase the reg to 140 the speed drops! it’s like the hammer cant handle pressure more than 137 bar even with hammer maxed out

i am using the same barrel on both with huma port

yes they are stock

hello everyone so i bought the FX IMPACT M4 while still having the M3 . i am shooting the JSB EXACT 33.95 grains and HN 36 grains slug so i setup my new M4 with the same M3 settings what i noticed is M4 cant reach same FPS as M3 with same settings although reg on both 136 psi hammer macro...

thanks for sharing your way of tuning as you know valve adjustments will give you more accuracy and more shots per fill that’s why i play with it so i am not wasting more air + looking for best accuracy

hi everyone since the valve is a big factor regarding the tuning process of the fx impact can i tune the gun for slugs and pellets at the same time? for example the hammer wheel on 10 for jsb 34 gets me 920 and 14 gets me 960 on HN 36 gr slugs OR do you think valve opening and closing will...

including 25 jsb RD ?

hello everyone superior liners are available now but it’s superior and vague no extra info regarding the difference between standard and heavy except heavy for heavy slug and pellets, standard for lighter ones so for .22 and .25 cal when could we say its heavy or light weight?

thank u very much for ur time and effort writing a very helpful advice i only needed extra fps since i started using slugs , i only use .22 for slugs i think i will install the old 57mm + modified pellet probe & brass