Recent content by milacik

I do not know why would leaving it empty cause any damage to the o ring really. I am sure very few actually know how a basic component as an o ring functions/seals, it works differently to what you have thought really. I work in the service industry with systems under vacuum daily. Deformation...

a PP700-SA for example has all what you need 1. open access to regulator screw 2. open access to the transferport 3. adjustment to hammer spring is inside the handle (not too bad to get to) but you want to touch that last no need to wait for a dreamline, if you mess around with PCPs just...

i dont think 5bar up and down is an issue, as the knockopen valve compensates normally for these variabilities very well even in unregulated guns. IF it is set up right. I would not worry about the reg, try to tune around it instead Wait a minute... the paid advertisers on Youtube dont tell...

RM100GUY so it is the action buggered then? Or both the action and the mag.

Jim81 there were many threads about this here and elsewhere. that it is a guns design problem not a scope problem, but some snowflakes - me for it like crazy! just shim it, as long as you use the shorter branch of the allen key you will be fine, no need to close up the gaps between the scope...

.177 is 4.5mm .20 is 5mm .22 is 5.5mm .25 is 6.35mm and so on. sorry i missed the .25. do I need to apologize to some Snowflakes here? i am used to receiving -s all the time, even if i supply the correct technical information.😂 the I.D. of the o ring in the breech is usually the outer...

do yourself a favor and finish the spring end properly you can do some reading here http://www.springsandthings.com/pdf/compression-new.pdf closed and ground ends. by the way did you cut it too short???

OK it has a lever but swings out minimum distance. Thus you have to push harder and/or longer to do the same work. Does it make sense? google it keyword is leverage basic mechanics. I dont mind if it does not swing out wide, but it will never be butter smooth ever like you read on here about...

it has no proper side lever so you will not have the benefits of the leverage so will be harder to cock, difficult to say what are your expectations so dont be surpriced also i dont think they had the plastic magazine in during the Jeep testing lol by the way the scope always sits high on a...

why would you put a .25 o ring into a .22? it is definitely a 5.5mm I.D not 6.35

it seems they mastered the reloading action even at 90bar, thats a .177 number. well done, soon will be buying Asian PCPs.

big fat starlings in America 😁 be careful some town-boys will learn zoology from Internet here.

looking good, now half the price 😉

thats the only way to reduce the transferport size. by clipping it deliberately. I would have bought the Vulcan 2 but for some stupid reason they did not put a power adjuster on it. Funny thing is their dart tranquilizer version had it included! By power adjuster i dont mean the hammer spring...

Is it true that labradar is struggling with tracking small pellets? only good for large calibers otherwise you get only muzzle velocity readback and others are unreliable?