miksatx's latest activity
miksatx reacted to Sergey1972's post in the thread Huben Any issues or problems with Huben gk1 please share your experience with
Like. Only difficult to align if you take out the 2 screws that align barrel to magazine. Otherwise loosen nut, tighten barrel, backoff 1/8...- miksatx replied to the thread AirMaks Arms The krait line of guns - what's the difference?.With out stock.
- miksatx replied to the thread AirMaks Arms The krait line of guns - what's the difference?.When you pull the stock off it exposes trigger linkage. So not the same as the standard. The dang stock was wrapped in bubble wrap and...
- miksatx replied to the thread Huben Any issues or problems with Huben gk1 please share your experience.Seems like ya screwed the barrel in till it touched the mag then back off and 1/8th turn. I got a shorty kit for my .25 when I tried...
- miksatx replied to the thread AirMaks Arms The krait line of guns - what's the difference?.I bought a Krait lite .177 it started leaking at the reg after a couple shots. So I played OPERATION 12hrs later we're back spitting...
- miksatx reacted to Steve0's post in the thread Evanix guys! Viper won't hold air after the automatic sound went off with Like. Update! It was the valve stem part #36.took a few test shots seems to work perfectly now.
- miksatx reacted to boscoebrea's post in the thread Huben Huben Pistol GK1 Mini - Available in August 2025 with Like. I like it(y)
- miksatx replied to the thread Huben My GK1 V3 .177 tune and shot count.I do 177 cause pellets are cheaper. Just stuffing pellets in my guns they aren't as accurate as reseating them to the front of the mag.
- miksatx replied to the thread Selling airguns.Don't want to follow the rules? Head out to American Airguns Classified. Com you can buy sell there no problem.
- miksatx replied to the thread N/A The most shots per fill.....My Diana chaser tube with 15cc 4500psi bottle. Not to bad I'd say lol.
- miksatx replied to the thread Huben My GK1 V3 .177 tune and shot count.Yep still have the 3 and the .177 is my favorite and shot the most.
- miksatx replied to the thread Huben My GK1 V3 .177 tune and shot count.Quiet you bet has subscriber Tesla valve LDC 24x40x196.5mm
- Just shot this 350b to 200b. RWS Supermags 9.3g.
- miksatx replied to the thread Huben Any issues or problems with Huben gk1 please share your experience.I have a .177 and shoot only RWS Supermag 9.3 and 700fps. I also load 4 pellets use 3mm ball Allen key that comes in tool kit and seat...
- FX Dreamline has been working beautifully until today - now the regulator pressure will not stay above 50 bar. I can adjust it higher to...
