Recent content by mhc

I did use the white tape on the threads, also use tools to make sure it was tight. It never made any hissing, really nothing at all. When I would hold the probe in my hand there was plenty of air coming out the probe, when inserted into the fill hole, nothing going into the tank. I would like...

not sure about the 1/8 screw on the end of the tube, i'll check that out when I get back home tomorrow, out of town today. I don't have the gun with me. I took the tube completely off the gun and tried to fill it while holding it in my hand. It still would not allow any air in.

That's a good question, I have no clue if I can let the air out. A bad gauge would mean I would have no idea how much pressure is already in that tank. Instead of only 75 bar it could have too much pressure. It's late here and I have put the gun back in it's case. I'll be out of town...

well the 255cc tank reads about 75 bar. The pressure in the line is 3800psi. I do see the small hole on the probe, but did not orient toward the cylinder. I just stuck it in the refill hole. I'm going to give this a try right now in the house, After I see your next post. Update I did...

yes on the slow flo valve from joe-b. every thing from joe is working perfectly, I think. I forgot to tell everyone, I am brand new to pcp and air guns. This is my very first setup, so don't really know what I'm talking about. ha ha Well anyway, it's the 255cc air cylinder, it will not let any...

What could be the problem? I guess I know the problem, the cylinder won't take air. can anything be done short of new cylinder? I bought it at MIdway USA and they will happy to give me a new gun, the problem is they are out of stock for another month. I have one of Joe's tanks, Pressure in...