Recent content by MetalGirlSoniX

I am aware of the different sizes of the regulator housing, and it's a lazy move from Huma to just copy and paste their info from the Impact, which also makes it incorrect. The Crown got the larger regulator housing and 10 mm belleville washers on serial number 180760 and after. These larger...

Huma finally released their awaited regulator for the FX Crown! https://www.huma-air.com/FX-Crown-Tuning-Regulator

I got mine in the beginning of June this year, altough since I live in Sweden, I'm guessing it had been on the shelf for a few months (not many people buy airguns of this "level" here). It's in .25 and from the beginning it was set to sub 10 joule (about 7.5 ft/lbs), so the reg was set to...

This weekend I decided to open up my Crown to perform this mod, hoping to eliminate the reg creep. Once inside the reg chamber, I noticed the belleville washers were already stacked the "right" kind of way. More specifically, there were 19 washers stacked like this; []--- (())(())(())(())(()...

Ok so I'm preparing to do this mod on my Crown, and I'm trying to find fitting flat washers for both the "small" and "large" regulator, as I'm not sure which one I have. I just want to have everything ready before I open it up. The only washer sizes I could find were 8x4,3x0,8mm and...

Does this mod eliminate the reg creep on all reg pressures? Or just when the reg is set to 150+ bar?