Recent content by mercado

Awesome..👍👍

I hope Trenier out Doors bring them soon . That is my preferred retailer ..

If you really have time to shoot w get a AGT the bottle will give you a lot af shoots , if you just shoot some times and shoot cout per fill don't matters to you then you could buy a Taipan . For 100y+ the 600mm barrel in the AGT is plenty enough.

Yup but for some reason those AA are way more consistent than the jsb branded ones but i really prefer the HN 18g harder lead .. I one was trying to setup a .25 vulcan and the JSB spread was so bad i though that the regulator was damaged.. change the pellets to AEA problem solved the spread was...

My only pellet shooter use AA 18gr or HN 18gr no JSB for me .

Im not a expert but the hardenes in PB bullets depending on the manufacture is a bit high.. usually pure lead is bhn 6 to 7 .. PB bullets bhn is 16+ n even higher . The harder the lead the more difficult will be for a airgun to shoot it ..

I cast my bullets . Buying bullets for plinking with a big bore , gets expensive pretty quick .. when you decide that the 308 is definitely a keeper . There are some inexpensive molds you could buy . Noe have 2 molds in the 135gr at $65

Awesome Deal .. you will see in most reviews the 308 likes bullets from 130gr to 150gr .. these are the weight i have purchased for mine , n they have worked great ... at 120gr it is to light for the 1-14 twist in the full length texan ... the 120 might work if you tune the gun at a...

It could be the time now for corbin to make pellet dies, for those that shoot pellets ,i never got to buy pellet molds because casting the skirt is so delicate it takes a lot of experience to get it right, in order to have a good flying pellet.. bullet n slugs are more forgiving .. only my 22...

A sadly thing is that with the years NOE offered the wider selection of small bore .172 and .224 molds with him gone, there is almost non aviable anywhere anymore.. for small bore swaying will be a way better option from now on .. at least .257 , 308 n up they are plenty of molds aviable at...

And that is why i only have one pellet shooter . A taipan mutant it shoots almost everything perfectly .. all else, slugs or bullets .

Eagle vision have 30mm adjustable reverse rigs ..

NOE in the House..😍😁 .. finally here. Im getting one in 257. His version of the 257-312

Only Neil Clague is making complete shroud for the Texan .. but depending on what caliber you need.. it would be better to either tread the barrel , or have one of the Donny moderator adapter for the texan so you could test different moderators. Why because the reflex shrouds that are custom...

The only way I will spend again 2k + in another PCP is that it comes with the proper twist for the newer heavy slugs on the market.. preferably esten European if the Epic ONE make a 14 - or 12 twist for .22 and a 16 twist for. 25 im definitely buying a pair, either them or The mora who ever...