MDriskill's latest activity
- MDriskill reacted to TnCnDn's post in the thread Other Who repairs vintage Walther springer airguns. with
Like. Drop dead gorgeous right there! What I would do for a LGV. - MDriskill reacted to Chuck-in-Ohio's post in the thread Other Who repairs vintage Walther springer airguns. with Like. Those are absolutely lovely examples, a very attractive timeline photo.
- MDriskill replied to the thread N/A Best bang (or plink) for the buck?.Welcome to the forum! Great choices, and keep on havin' fun!
- Been looking for one of these for quite a while. Air Arms Khamsin .177
- MDriskill reacted to Pellets&Pistons-(Razor62)'s post in the thread Air Arms Latest addition with Haha. Stunning!!! If only it were a lefty.....:(
- MDriskill replied to the thread Air Arms Latest addition.That's a beauty Mike. We would expect nothing less from you of course! :D For anyone interested, Air Arms has a wonderful web site with...
- If its 3mm a 1/8" drill bit won't fit in the port. If it fits in there, it's 4mm. Its important to know what you have
- A lot of good information here. Just to simplify things. If a 4mm transfer port stay leather or you will lose power and smoothness going...
- Mike, I have a 1980 model (serial 784069) with an older Vortek HW35-PG2-12 Tune Kit and piston seal adapter. It's getting 10.5fpe with...
- I believe that the seals are same same between the two affixing methods mentioned above, but the filler piece is different between the...
- Nothing Wrong with an undamaged leather seal. I have seen reports of upgraded guns seeing improved performance by going back to a...
- I had the 12fpe VORTEK kit in my 35e. I didn’t care for it. Why? It didn’t feel like an HW35 was designed to feel. It is not a hunter...
- MDriskill reacted to Kgphotos's post in the thread HW/Weihrauch Hw30/Olympia Hobby pellet test. with Like. I’ve shot multiple groups that are under .5” at 25 yards with the Econ II pellets and my HW30s. It’s also the same for my HW50s. It also...
