marflow 777's latest activity

well as always you work with what you have, in my case there are 2 screw holes to hold the sight frame on to the pistol and the weaver...

try some Button hex screw the head height is far less, so the grip might not come to play i had a similar mount for my Aeron B96 but...

so, years ago i decided to make some single cart they had the pieces on Ebay for less than 10 bucks and this was a time that the...

oh i understand, you get an idea and see where it takes you and that is a rabbit hole there has been many a time that i have an idea...

so, yet assume you have nothing to work on the rifle your supplies will cost X amount and then you get it all cleaned up and now what...

IT IS AN INTERESTING BUILD but not very practical for the average owner, because of the cost and tools needed hell, your R&D work in...

PEP3 can you point me to that mount Brand or where purchased

when i first read about one i was like WHY now i just skim read this Hard Air Mag story and it has some information that is interesting...

Jetpopt does the rear sight have a bearing ball under the adjustment screw the trigger screw would need a 2mm now the trigger can never...

i am not sure you are going to find the older style black one, oh sure there might be some around

the simple answer is both will work the story was that the black tubed adapter lost less CO2 when you unscrewed it but who knows and it...

i have had my P17 opened up and had no problems but when i went to open my HW40 the cover was very hard to move and just stopped like...

the problem is Diana as a brand, is moving away from manufacturing to, just branding and selling BlueLine show the 460 and 48 but Diana...

i would think that the stem seal is not an Oring but flat sheet goods and the material would need to be urethane i have been looking at...

they have an email, they have a phone number have you used either should we assume it is this place now i would have contacted them...