manabeknives's latest activity

In addition to the Stud magazines, i also like the Carm magazines for Skout Both the multi-shot and the single load mags work smoothly

the clearance i have between the barrel and the bottle is .74mm ...about the thickness of a credit card

For those that want to know, I had a reply from Keith stating the size #4-70 o ring 2.8mm x 1.8mm is the closest metric. However, I...

I had that spring launch into oblivion ...lucky it you found it (y)

This place has great breakfasts, lunch and dinner... and a bar...

Here’s my latest. FX Royale 400 with a Huma regulator shooting 15.89 pellets at 930 fps from the UK with a synthetic stock to boot...

I think it was due to the huge amount the button needed to remove from the barrels for a 2 groove and the slower twists that were not...

I cannot even remember how many folks I have hooked on airguns - Just by giving them loli-pop targets to shoot! Our favorite to date...

Worked fantastically fellas! Awesome Thank you so much to everyone! Loosened the gauge a little and back to normal pressure!

I used this weird adjustable wrench that is technically for bolts but it worked perfect and the gauge has some sort of plastic cover so...

all at once with the same reply...that's impressive (y)

Very nice write-up Beautiful countryside! Agree that RTI need to make a better butt pad .. probably the worst feature on the rifle Mike

That's a beauty! Very similar to the one i own, but the barrel on mine is a cut-rifle barrel not a Benchmark about the same...

Via some Wheeling and Dealing i procured a very nice OLD school thimble style TM1000X with what i think is a Benchmark Barrel. Came...

One cannot eat too much Chocolate .