Recent content by Malsonb

My AEA was leaking around the regulator. Took it apart and cleaned it. O rings looked good. Reassembled it and now it is leaking were the air cylinder touches the receiver. I'm believe it is one of the o rings that goes on the air cylinder adaptor. I thought it was the air gauge at first. Anyone...

I have a hp max .510 that I changed barrel to .457 that has a slow leak. It has a regulator and worked great all last year. I pulled it out of of gun cabinet a noticed it was empty. Filled it up and it slowly leaked out. I would say 300psi a day. Any suggestions on were to look first? Thanks in...

I use swagged pro slugs in my big bores, they seem to be consistent. One thing that helped me out was using the patch worm cleaning system. Keeping my bore clean was a major contribution to my accuracy. Good luck!

When I am sighting in or checking zero i use single shot tray. The only time I use a magazine is when I am hunting. To me either way will do.

Here's a recent picture of my .457 and my .30

This is my HP max .457 that started as a .510. Could not get it to group with 10" or 22" barrel. Bought a .457 barrel kit and it shots so much better. I have a HP max .30 that is very accurate. Fingers crossed no problem.

IN

All my fills when testing .510 barrel were around 4300 psi.

I haven't shot my .457 barrel over chrony yet. My .510 barrel was shooting 400 plus with cf bottle and original tank. Fpe was about the same. For my gun it did not restrict any air flow. We currently have a foot of snow and hope to do some testing when the wheather clears.

I have the 22" barrel

Haven't had a chance to run it across the chrony. I would guess first shot at least 400 fpe. I hope to test it soon as the whaether gets better.

Here's a 6 shot group sight in at 50 yards. Pro slug 195 LH FD swagged. 3 shots to bottom was sighting in.

IN

If you buy same caliber barrel you just have to change barrel. Pretty easy!