Recent content by mackeral5

Looking for a .177 liner, 500mm or longer. Please pm details. Thank you.

Looking for a decent deal on an AEA Challenger .510 Bullpup Do you have a Challenger .510 Bullpup you would like part ways with? A leaker? A bad barrel? A bad valve/poppet? If so, you may have exactly what I am looking for. Please send details via PM. Thank you.

I typically keep 2 N2 cylinders on hand, regulating the higher pressure of the 2 and just using a fill station on the lower pressure cylinder. After 5+ years of exchanging many cylinders with 2500psi remaining I finally picked up a booster. Now I can run my cylinders down to <1kpsi and still...

That's the 'right' bottle. The big bore Sarissa is a little harder to find in their site, I used a Google search to find the page. Based on memory, 10 shots around 120fpe is likely attainable. More than 3-5 in the 150fpe range is a bit unrealistic and IMO bordering unsafe. If you do the...

A 17ci (or 21ci, I do not recall which) aluminum bottle, 2" OD, 3000psi rated, was the best match for that gun, IMO. Plenty of air, lightweight. Used to be very inexpensive via Ali Exress. With the breech riser there is enough room to run an STO Sarissa or equivalent. The STO Sarissa was...

Glad to see that one is still in circulation and being enjoyed by a new owner. 100- 150fpe is what it was designed to do. Any more than that is expecting a lot of the long 10/32 bolt/cocking screw not to mention the 4/40 and 8/32 breech screws...... Those barrels are all TJ 1:26 and like...

This listing has been renewed

My last order was 10 days from order to arrival. I typically order at least 10 packs per order and the packages come via FedEx. Several US vendors exist, STO being one of them.

This listing has been renewed

This listing has been renewed

I had a constant, very slow leak on one of my veterans, even after all orings replaced and reg rebuild. I keep a spray bottle with a fairly heavy mixture of water and Dawn dish liquid on hand, it works pretty well as a leak finder. Spraying with soapy water showed a tiny leak at the gauge to...

This listing has been renewed

It will vary, just inspect after the first thousand or so shots to see what it looks like. Lower energy pellet shooters may never require cleaning whereas higher energy slug shooters may shed more lead and require more frequent cleaning. Higher shot counts at higher energy levels typically...

This listing has been renewed

Thanks for sharing those details. In this area all of our 6KN2 cylinders are green, I have never seen a black one over here. Initially plans are to both feed and drive the booster with nitrogen. Depending on how much nitrogen this consumes will dictate if I change over to my shop compressor...