Recent content by m.elserafy1985

Where can I buy Fx stx St adapter for taipan veteran ???

This response from taipan itself

How many turns in order to increase taipan veteran regulator 10 bar ?? Is it 1/4 turn or 1/2 turn ??? I haven't reg tester .

1- Do you have 0.22 standard or long ?? 2- what was the factory reg pressure !!! 3- how many shots before and after power plenum installed ?? Good job and Thx alot

Is taipan factory valve weak or not strong enough for working in high pressure, or not recommended for heavy hammer spring and power plenum ?? Can I buy two from you ??? I have PayPal account and USA address.

1- how many cc for taipan plenum ??? 2- what is the recommended cc volume for taipan veteran 0.22 standard ( reg pressure 135 bar factory set ) ???

1- What's the difference of installing one plenum or two plenum ?? 2- Need to know the advantages and disadvantage both of them ?? 3- what is the recommended one, if I want to shot heavy slug 25 : 33 gr with average speed 920 f/s and a good shot count ( average 50 shot ) ????

😆😆 Sorry my English is a little bit good, should I choose 0.62 inch lenght ???

should I choose 0.62 inches ????? Because there is many others lenght ????

Thanks alot for you 1- Why I shouldn't recommend not filling beyond 250 bar, I will already add an extra air capacity, how do this plenum increase the shot count while I fill 250 bar also like before ??? 2- could you please give me the exact link for hammer spring, I searched on Amazon, didn't...

Hi everyone my name Mohamed from Egypt I have taipan veteran standard 0.22, and I really need to install power plenum for shooting heavy slug 25 : 33 grain, I have some questions 1- what is the recommended reg pressure should I adjust after installing plenum ( noted factory set about 135 bar...

$ 2499

Both of gauges are very accurate as pump gauge

The shot string from daystate was pretty good, 31 gn done about 50 ft/b with stable muzzle velocity 857 f/s ( only five shot ).

So the best thing to do, and i have already done it, is to decrease the reg pressure to 155 bar approx and increase the length of stroke ( 1.5 CW rotation ) to get about 277 m/s with 24.4 gn .