Recent content by lrg4you

Interesting, thank you so much!

I have purchased CS4-I and it didnt come with grease, anyone know which type of grease they are using ? i have bought it from Aliexpress and if I ask them about the grease they will took long time to send it , I want to buy the grease from amazon but I don't know which one.

Guys please answer me, i have FX Crown MK2, and i have leaking from regulator area at atmosphe hole, i have changed all orings for the regulator and the leak still there, now i read that there is an oring in the regulator bore, which i kinda swear that i dont have that one, i really tried to...

Sure i will do another session with different speeds

2L8, yeah i have tried the jsb monster redesign 25 grain and hn barracuda 18 grain, you can see the images and read the description there.

Hi, Yesterday I went out to do some accuracy testing on Delta Wolf .22, wind speed was about 7Mph, I was not impressed tbh with the result. i will not judge the gun accuracy now but i did another grouping on same distance on H & N slug in both .218 and .217 and it was horrible, about 2.3" CTC...

Guys, when you want to reduce the reg pressure, how many dry fires do you need to release the air inside the plenum? because in my case I have to keep dry firing from current reg pressure until it reaches 0, the air is not releasing like FX impact, any idea? or it is normal this way?

So, you are saying its not working like FX impact? I found it strange because on the manual it clearly says that you shoot couple of dry fire shots and the air will be released!

Hi guys, i need help please, when i want to reduce the regulator pressure, i remove the front bottle and i should dry fire couple of shots to remove all air inside the chamber, is that right ? Because in my gun i have to dry fire all the way down until pressure reach zero, i am talking about dry...

As much I really want to enjoy this gun, but in my experience, the Quality control is REALY bad. I owned 8 airguns and none of them have that many problems, this is my first airgun from Daystate and it will be the last, the big problem is that I just notice in my country we don't have a proper...

Ok back again, now I have some problems and I did send back my delta wolf .22 HP to the dealer and I hope that he can fix it. problems are : 1- Leak from Valve the gun now cant hold air anymore, an air leak coming out from barrel or actually from transfer port area, my guess is that it leaking...

I own 10 PCP airguns, and by far the loudest one is my Delta wolf .22, even if you set it up at 30ft/lb still it is loud compared to other guns. 

Here is another result, using advanced mode settings ( 2218 ) and here is using advanced mode with my own settings, for 31ft/lb I have asked myself, why not trying to decrease the hammer dwell as much as I can and increasing the volts to get my desired speed, I wanted the least amount of...

Nice!

Yes, I can say there is a problem with the first shot while using both modes