lopezvega95's latest activity

I have been shooting Impacts for a while now along with a Maverick and had two Pantheras. If you have time red through threads on the...

Hammer spring, hammer and poppet spring can change poppet dwell. Ive been thinking of a way to measure the volume of air through the...

Nice and complete overhaul, i like it! Thanks

I would do transfer ports, probe, carbon sleeve, a better fitting top rail, then ergonomics for your fitment.

I like the Huma high flow probe and transfer-port and the FX Carbon Fiber liner sleeve to start out with. If your MK2 has the small...

I agree with cahil_2. Leave it alone and see how it performs. My M2 has the "power plenum" which is one step up from the original...

IMO the most suitable upgrade is patience. Shoot the gun for a while and get very familiar with it first just my too cents Edward

I will definitely look into a the regulator, and ill check a video on how to determine the twist rate, since I have never really done it.

You can determine that yourself. Remove the liner. You will note that the rifling is also obvious on the outside of the liner. Just...

For sale: Impact .22 700MM Barrel Kit & Magazine. Less than 400 shots through it. I purchased an M4 sniper late 2024 and converted it...

Plenum on a poppet valve guns are tricky. The number of variables that can limit effectiveness are many. Primary is poppet dwell. How...

The pellet probe has a lot of slop in it, Not sure how to tighten it up, Take the magazine out and fill the probe it slides back and...

I haven't played with the regulator, it has a rusty screw so I didn't what to strip it, i was waiting for oring kit to arrive to...

I don't have an mk2 but I have a m3 700mm .30. It depends alot on the twist and working out a tune. I just put a 1/40 on mine and worked...

Don't know, i got it used so not sure what the previous owner had on in