Recent content by lbc_PSI

Here's some exploded regulator diagrams..spring and belleville washer versions.. Make sure you have the belleville version. If you don't and RTI can't help you out, there are a couple of places on-line that carry the belleville upgrade kit..much cheaper than a entire regulator...

It’s amazing how effective and accurate the 10.03gr mk3 are. My RTI loves them. The pests not so much 😄

Set up a security system with cameras so you can establish a pattern as to when the problem neighbors aren’t home. They can’t complain if they aren’t there to observe. 😉 If she’s feeding the squirrels, many cities in NC prohibit this. File a complaint. Weren’t the squirrels in your yard...

That would really be a shame if true 🫤

A four bottle wine box with a handle. Filled with rubber mulch. To prevent pass throughs, I insert a section of used rubber conveyor belt (available on Amazon) into two of the wine slots. Will stop a robust .30 hybrid at 890fps..as long as I don’t shoot more than a 3-4 shots into the same spot...

You would think that from a marketing standpoint they would show pics of the product mounted on each of the airguns it works with.

Doesn’t even need to be a complete rifle. I be happy if someone would make a “drop-in” after market .20 barrel for the RTI Prophet..in 16” (400mm) or 18” (450mm). Really happy.

Is this the old or new style Veteran? Not sure it makes a difference in regulator but the V1 is very different from the V2.

The thread on the FX 170cc tube is NOT M18x1.5. It is ??? and considerably smaller. You will need an adapter for the FX to M18x1.5. Or as I did, replace the tube end insert/cap. The resulting project..based on a Naked P1..but essentially a bottle to tube conversion..

I’ve got both the 4-16 and 6-24. FFP with the illuminated center dot. For the price, no complaints. The dot doesn’t wash out the image in very low to no light like the fully illuminated reticle does…at least for me. Light weight is nice too. 4-16 top. 6-25 bottom. Vortex rings and flip caps...

Like people have mentioned..depends on the tube threads. This is a pic of a standard FX 170cc tube next to M18x1.5 bottle threads of an RTI regulator. All you need is a good machinist for an adapter.. Then assemble.. ;-)

The Discovery are a good value..the HT line ..6x fixed shown above also comes in a 3x version

LOL. I’ll say you must like the Venom! The thing about the March optics is “buy once cry once”. They are awesome glass. I’ve just never been able to “cry” that much. 😉

These definitely aren’t March quality glass but for what I’m using them on they’re more than adequate and bargains $$ https://discoveryopt.com/products/ht-nv-3x24ir-sfp-moa-diameter-30mm-ultrashort-optics-scope?_fid=ee5ff13e5&_pos=2&_ss=...

The JSB KO MK3 are literally the bomb. Same experience on CA ground squirrels