lbc_PSI's latest activity

Can’t speak to the P3, but the P1 has a transfer port restricter grub screw. It will definitely take a .22 compact below 20FPE. It may...

I'd take this design and add the Edgun R5 barrel tensioning and 360 degree transfer port. The barrel would screw into the transfer port...

I would head to RTI’s factory and say let’s build a traditional carbine rifle. Tube air tank, big enough plenum, their balance valve...

Not YET, anyway. Are they being used more than ever before, absolutely. However, in situations where it's vital to have rugged, simple...

The P1 Performance Compact can use either 400mm(16") or 500mm(20") barrels. I have a .22 500mm CZ barrel that can easily push 22gr...

That’s sort of what I meant but not. The way certain archery programs do this is: Measure peep height above the center line of the...

Do any of the airgun ballistics calculators just use two shot in distances to generate the drop tables?

This was an interesting read.. https://www.ucdavis.edu/news/feisty-squirrels-hold-clues-treatment-rattlesnake-bites Apparently...

I was rooting for the snake. 😉

Shot these a lot when I had my R5 Standard. They shot to the same POI in as the JSBs of the same weight. It was a no-brainer to use...

Agreed, but most show up well enough on cardboard backing with proper lighting. I use the colored dots for casual shooting. Will look...

This would also give a good reference for “how many clicks to get to where I aimed” And you could easily change the grid size. 👍

Thx for the feedback. That's pretty much what I was planning on doing. Vary the TP diameter in steps of 0.5mm. The one I have that...

Thx..currently have an e-mail conversation going with them.

Thx for the link. I’d found a similar item but a 10qty. Still looking for something similar in brass for workability. No luck yet...