LayeredOgre's latest activity

I wouldn’t know enough engineering wise to say why they do barrel oring vs probe, I feel like the friction, seal, alignment etc would be...

The bolt in theory could get taken out and machined to take an oring, but then the barrel would have to have the oring groove filled in...

Always, makes for way easier barrel cleaning! It’s mostly increased back pressure that blows out the oring here.

My S45 absolutely loves NSA 196gr slugs, shoots them with amazing accuracy and great fps/fpe. However since they’re oversized they’ll...

Valve pin to receiver seal to my understanding is how it works, depending on how bad it’s leaking from there I’d try to shoot it quickly...

This listing has been renewed

The valve pin sits in a little metal cup housing that threads into the receiver part, there's an oring on the outside that seals from...

This listing has been renewed

GK1 in .25 hands down. Touching hole groups, ~45fpe for 17 shots, from a pistol! Admittedly an oversized one, but still. Crazy...

52mm front tube valve- will need 1 new oring, rest look good to go DonnyFL 2” mod adapter TPP 4” mod adapter Muzzle brake- some...

This listing has been renewed

The best thing to do is have someone else shoot and go stand some distance away to get a feel for what others might hear. Then switch...

If I’m reading that right looks like 6 shots on reg. Honestly not as much as I’d expect, but still clearly showing the merits of a...

k Regulator and Cyl Full Tanlk First Shot Second Shot Third Shot Fourth Shot Fifth Shot Sixth Shot Seventh Shoth Regulator at...

Looking for an S45 parts gun, broken, jammed, leaky, inoperable etc. I’m only after the receiver part and its internals. I’ve got a few...