kwaping's latest activity
I'd like to join @airgunutty in expressing thanks to all here as well. He said it perfectly, couldn't do a better job if I tried. So...- I would just like to say a huge thank you to all of the members who have taken the time out of their lives to offer up opinions...
- kwaping reacted to HonorableMention's post in the thread Skout ManuLoader solves a magazine problem with
Like. The Skout Airguns Epoch / Evo has an open - faceted magazine design which uses a relatively short torsional spring to index the magazine... - kwaping reacted to Geneeus's post in the thread Regarding weighing pellets - The scale matters..... with Like. I agree that the actual weight isn't the issue, it's the variation. It seems to make a bit of a difference at 100 yards. I usually use...
- kwaping reacted to SorenDrost's post in the thread Daystate Daystate BlackWolf TAC .177 HP with Like. Just a short video with the Daystate Blackwolf TAC .177 HP shooting JSB KO slugs at 50, 75 and 100 meters :geek: 🎯 🐺
- kwaping replied to the thread Daystate Daystate BlackWolf TAC .177 HP.I think they can both deliver a pellet or slug consistently on target, same as many other airguns today. I would expect the differences...
- kwaping replied to the thread Classic or Tactical? Which do you prefer and why?.
- kwaping reacted to puddleglum's post in the thread Classic or Tactical? Which do you prefer and why? with Like. I'd like one of each, please.
- Same thing happened with my recent Wolverine R purchase. I bought one from AOA and asked them to adjust it to 19.5 fpe which they did...
- Here what came in today! Charles
- Resurrecting this old thread but just wanted to thank the OP for this helpful post. My wife’s Revere started having what I thought was a...
- Task completed! New probe O-Ring and barrel transfer port O-rings (barrel bushings as Daystate calls them) installed in the Revere 177...
- I made a "tool" of sorts out a small piece of 1/4" thick wood, with a hole in it for the bolt probe. I then put the o-ring on the bolt...
- Use a couple pieces of dental floss or fishing line to act as handles to allow you to pull the o-ring down the probe.
- kwaping replied to the thread Daystate Daystate Blackwolf.No, not easily. There's also a notch cut out in the foam for the handle that prevents an easy reversal.
