Recent content by krasiml


I do not know where to buy in US . I live in Europe, but bought from here : http://www.aliexpress.com/item/5-28X1-78-Oring-5-28mm-ID-X-1-78mm-CS-PU-POLYURETHANE-ShA-70-Translucent/1968991134.html These O – rings are also used to fill probe.

PUR 70 5,28×1,78 (ID 5,28 CS 1,78) http://www.fxairguns.com/wp-content/uploads/2015/10/wild-exploded-drawing-AoA.pdf

 For .22 Wildcat - PUR 70 5,28x1,78 (ID 5,28 CS 1,78)

http://luftvapen-en.nya-ebutik.se/reservdelar/fx-airguns/repkit-fx-airguns Communication is good. I think that there will be no problem with sending the parts. Just contact them. FX Airguns only work with official retailers. They do not sell directly to customers.

BitFrost, You can security Wildcat to shoot without removing anything. Where the magazine is placed on the bottom has a threaded hole (3 or 4 mm of the eye). Remove the rear cheek piece and screw the bolt a suitable length into the hole. This will prevent the hammer to hit the valve and the...

People we are talking specifically about the Wildcat. If you are unsure of 100%, please do not talk about it because someone could get hurt seriously. The air under high pressure is very dangerous. By FХ should think seriously and to sell their guns with model-specific owners manual, and not...

I'm twice unmount cylinder of my Wildcat and not seen to have a security valve. Maybe I missed it, but I do not believe. Even the first time unmount the regulator, just to see how it was made. Bitfrost , which part is a need to be removed?

Cylinder can be unscrewed, but first must drop the pressure in it. This is done by unscrew the bronze plug on the left side with 4 mm hex key, but very slowly and carefully. Make sure the front of the cylinder pressure gauge shows 0 bar before you unscrew the cylinder.

Is anyone tested these pellets? I am interested, how they are presented with Smooth Twist barrels?


That's what I did and the problem is solved. I do not think it is the fault of the manufacturer. Rather it is my fault. I tried to disassemble shroud and then guess the barrel rotates. Thanks travels4fun. This will be useful to others like me.

Mine is the third hole, the most away from the trigger. I think, however, that the problem is another. A little while ago I disassemble the gun and hole of the brass end of the barrel did not match with the hole through which air passing after the valve. After being assembled speed increased to...

Hello, I have recently Wildcat .22 cal, but I have a problem with power. With JSB heavy speed was 760 fps. I screw the brass cap of spring and the speed increased to 790 fps, but it is very far from that declared by the manufacturer. Tests done with two different chronographs and the results are...

This is my preferred target:

Gorgeous shot. Why have so few videos on the Web for Wildcat? I have said a .22 cal rifle in two weeks, and I confess that I have not even tested it yet. That's because this season is very busy for me and I have no free time. But I promise to share videos and chrono tests as soon as I can.

I think this is bullpoop. In my country, air rifles forum is organized in general order of several months directly from the factory. Actually this spring had a bad batch. By JSB offered to replace the bad pellets. The next two batches are perfect.