Recent content by Kraftzion

Ouch! That finger had to sting. Mine felt like it grazed a rib. I felt a pretty good thump when I did it. It was kind of a dull ache after that, but not what I would call painful

Thanks everybody for the well wishes! The pellet is still in my back, but no fever or signs of infection. The Doctor said just leave it there as long as it isn't causing a problem. I was being careless and paid for it. I got off easy. A few degrees difference in angle, the pellet would have done...

Found a peculiarity in my pcp. I own a nova liberty. I had it out of the stock adjusting hammer spring tension, reg pressure, and shooting across a chronograph. I had it on safety(i thought). I had laid it on a table that was the same height as my bottom rib ( I found this out at the hospital)...

I will have to try that. I have never tryed a laser either.

What does an expensive dot site do that this one don't? This is the first one I have ever tried. It has 2 different colors, 5 brightness levels, and 4 different reticle pictures. I installed it on a $237 pcp that I don't beat on. It's easy to adjust, clear, and holds point of aim. What am I...

They buy them because they work and they are cheap. Easily the top selling compressor. You have something better?

Did you try different diameter slugs? I have the nova liberty, it likes .217 slugs. I believe it is the same barrel as the avenger. I did modify my barrel port and transfer port like stephen at avs did though.

Wow dude that is a work of art! I made a redneck version out of a hpa filter canister for my .22 nova liberty.

Looks the same to me. Open sights are kind of fuzzy to me due to age, this is not. If it is the same, the windage adjustment has a little locking screw on the other side. They send a little allen wrench for it. Unlock it before adjusting windage. Mine was unlocked when I got it, but I could see...

26 for the site, 15 for the rail. I bought another one for my .22 CVLIFE 1X22X33 Red Green Dot Gun Sight Scope Reflex Sight with 20mm Rail https://www.amazon.com/dp/B00A36MKUO/ref=cm_sw_r_apan_glt_i_1X3307JY35QZXBAWCV82

Air velocity sports on you tube has a good video on tearing down the yong heng and replacing parts. Basically there is a check valve in the leaving block that is prone to failure you might check. Other than that, rings. You might get by with replacing the high side (o)rings. There should be some...

I will have to try the felt and the spacer delete. I do prefer the Cam's.

I tested 2 inexpensive stripper moderators on my .22 liberty. Both performed equally well in my estimation. I noticed a significant reduction in sound out the front compared to stock. The noise when shooting the gun is not significantly reduced. The larger one is a Buck Rail, $25 + $40 for a...

The maruader style magazine at least in .22 caliber is pretty sloppy. One of the main problems is that the cogs are not long enough and the next pellet rides on the side of the probe. The stko channel on you tube has a few videos on the subject. I say maruader style because neither he nor I are...

Wow! Thanks again, especially for the links. My application, and why I need 1/8 npt is this. I sourced 3- 30 minute scba tanks locally. They have the quick connect style valves on them, I think scott calls them snap lock. The quick connect scott fitting has a internal diameter that can be...