keesbo's latest activity

It is a semi auto airgun. They are never as accurate as a bolt action version. The bad grouping is perhaps caused by the barrel and the...

Grappig dit. Succes er mee zou ik zeggen.

We wil find out soon if the thread is M8x1 for Shure. Marc from huma told met that they soon wil sell digital gauges with M8x1.

If it is the case that it is a M8X1 tread, there can come some good out of it. That Huma will have in the future gauges with that tread...

Then it will proberbly be M8X1, just like the Snowpeak airguns have on there pcp gauges. It also is not a Wika gauge, it looks like a...

I can understand that you asumed that it would be 1/8BSP Strange that it is not. Are you sure that the Sekmet is 1/8BSP. Because they...

Is het draadgat kleiner of de opening in de kolf? Is the tread smaller or the opening in the stock?

Down side of adjusting hammer spring on a Dreamline classic is the adjustment screw is just too loose. From factory there is loctite but...

It would be beter if you drilled a hole for the hamerspring screw instead of filing out. Good idea for the reg screw. But you must...

This is mine HW77k Special Edition, they are rare I think.

The JSB 4,52 8,44 grain should betreft way to go.

I always shoot the 100 meters indoors. Great if you shoot an airgun and offcourse a transport system for the shooting card. ;)

Oh, I use them in my HW77k which is 16Joule and in my HW77k which is 20Joule. Bothe with the same results.

I always shoot the JSB's 5.52 in al mine .22 air Guns. Can't say that there is a better pellet. Tried multiple, but the never do as good...

The HW77 is technical the same as a HW97k.