karl_h's latest activity

  • K
    karl_h replied to the thread Chronograph Madness.
    @Gwhite, cut those degrees by about 1/10th and you are in the sweet spot, and it makes a massive difference. Literally, a 2.5 foot...
  • K
    karl_h replied to the thread Chronograph Madness.
    @AlanMcD SNR is more complicated than just a value. For instance, you mentioned a SNR below 25 in your situation can easily lead to be...
  • K
    karl_h replied to the thread What gun, what criteria?.
    I'd have to disagree, it is a choice not to know and that says a lot about the person in my book. That was me in 1995, the part of...
  • K
    And a slug is what? Let me help you there..... 32.17404 lb, wow, gravity again.... How do you think it is derived. Whenever science...
  • K
    karl_h replied to the thread Chronograph Madness.
    If you haven't already, download the labradar individual shot traces from the sd card. With the labradar set for subsonic range, the...
  • K
    karl_h replied to the thread Zero Compromise Scopes.
    For those worried about alpha glass parallax settings from the standpoint of ranging in field target, you are likely barking up the...
  • K
    When discussing foot lbs, which is the standard use of muzzle energy in the United States, gravity is needed to calculate, changes mass...
  • K
    That number can be found to be different in many places, sometimes rounding differences, one time long ago it changed with a more...
  • K
    I wanted to hop on this thread and say that I have owned several AAA Evols and none have looked like yours. That is NOT a new gun. That...
  • K
    It's been through at least two formulations, likely a third. Originally it would produce a pinkish bubbling surface when applied. That...
  • K
    karl_h replied to the thread Other The IZH46M Achilles Heel.
    you can't weld pot metal. It will break very quickly if you do. That is a simple part, it would not take a very skilled person to make...
    • mount.png
  • K
    karl_h replied to the thread How much clearance?.
    I was talking PB land, I don't know how much translates to air rifle land, but shouldn't be too much different. I actually had a...
  • K
    karl_h replied to the thread How much clearance?.
    Awfully tight, I wouldn't do it. Commercial PB will not go below about 0.05 over bore size, and many/most not even that. Custom built...
    • alignment.png