Recent content by kalidona

Totay I am going to try filling the gun by followind these steps. 1. Connect the compressor hose to the gun 2.. Open the bleed valve of the compressor 3. Turn on the compressor's fan and next the compressor pump 4. Partially close the bleed valve so the pressure rises and equals the gun's inner...

Thanks again all of you. I will try to work with open bleeding valve first and partially close it. I double checked that the filling probe is fully inserted to the gun as when I use it with the hills hand pump so it is impossible to have a problematic probe. The connection with the adapter...

The compressor is new and first time tested. The gauge indicator rises in a few seconds and shuts the compressor because it reaches 300 bars. So it's not a leakage problem. But I 'll try with the test plug also to eliminate this possibility

Thanks for your replies. As I mentioned earlier the air flows from the pcp compressor hose + adapter + fill probe when I don't connect it to the gun. I tested it. The weird thing is the quick pressure rise. It really seems like blocked air at the end of the hose but as I mention the compressor...

Hi from Greece. I bought my first PCP compressor from Amazon in order to fill my two Kalibrguns (Cricket and Argus 60 ). Amazon Until now I used a Hill MK5 hand pump using the kalibrgun fill probe strait to the pump hose (1/8 BSP). In order to use the quick connect of the compressor I...