Recent content by JWilson

Loosen all 4 of the handguard screws. Wrap your moderator with a tripled over paper towel then install. This will force the handguard to be centered to the moderator. Tighten screws. Don’t worry about a tiny gap where the handguard attaches. When the screws are snug, it will not move.

The shroud slips over the barrel and is sealed via an oring to the barrel. The forward portion of the shroud threads onto the 14mm threads of the barrel.

Jack Kwan makes blowback shrouds that are an expansion chamber and an air stripper. He has models designed specifically for the Huma or Donny moderators. I like the carbon handguard, so I have tested both the Huma and Donny versions that fit in the handguard (Mod40 and Shogun). Both are quite...

Remove the air tube and dunk it in a tub of water. Find the leak and fix it... It will not harm the gun. Make sure there is air in the air tube. You may have drug some contaminant in with the fill probe and are now losing air from the fill probe check seal. Dunk it. No need wasting time trying...

My Alfa is etched.

Looking for a Sumo. Who has one they don’t use anymore? Joe Amazing... A member and someone I have talked to about guns in the past is sending one for testing.

More than likely one of 2 things. If folding the gun resets and allows you to shoot one shot, the trigger linkage is probably not resetting in relation to the valve stem pin. First adjust trigger linkage to make sure it is not inducing a bind. If that is not the issue, you will likely need to...

Leshiy 3? What did I miss?

Warren Snaith 

Personally, I check daily hoping to find a good deal that is enabled by such discussions😂😂😂😂😂

 

I did it for cosmetics. The gun shoots amazing. I don’t think it has anything to do with the CF sleeve, but I’m not taking it off.

My son is just not getting into Airguns. I was excited when he got the gun as I shoot airguns waaay more than the PBs. My son is wired to shoot PBs and is now itching for a different project. Available is his like brand new Hm 1000X .25 red laminate rifle. It will come with 2 magazines and the...

I have a .25, 350mm. I wanted the look and feel of the carbon fiber handguard. I tested many moderators... spent a fortune buying/selling and shipping moderators. I have stuck with the Mod40 long, but do not use the extra baffle section. My gun is set for 50 ftlb, shooting the 34 grn pellets at...

Have you resolved your issue?