Jorgo

Forum Replies Created

Viewing 20 posts - 1 through 20 (of 164 total)
  • Views :
  • Link

    Jorgo
    Participant
    Member

    Ronny who sell this valve stems.

    Can you send me the contact.

    I need on for a Atp2

    Link

    Jorgo
    Participant
    Member

    With Airforce Condor the beasts are very dangerouse at long range.

    Speed 285-275 m/s

    18 inch LW barrel

    Have try to shot them 120 Meters plus.

    Point of impact was sometimes more than 20 meters from POA.

    At close Range to 50 or 60 meters they hit hard accuracy is not so good as the jsb heavys

    Link

    Jorgo
    Participant
    Member

    Everyone who start sizing the pellets need more than 1 or 2 sizing tools.

    I have very good results with sized pellets and every barrel need another size for the optimum result.

    At my Hatsan AT 44 10  i sized the sirts 6,44 mm and it shot pellet on pellet at 28 meters

    The Hatsan Bully do this with an 6,38 skirt size jsb kings or heavys

    My sizer is a steelblock with 11 holes from 6.34mm to 6.44 mm 

    So i can test ervery skirtsize in this range.

    If you use only one ore two sizes you can have luck or not

    Best Greathings

    Link

    Jorgo
    Participant
    Member

    I have no luck with the 25 to shot slugs.

    Have try mp mold 48 gr slugs and  Gmi swag Slugs 34gr and 48 gr 

    They work not good out of the Bully

    Link

    Jorgo
    Participant
    Member

    At close ranges they are good but i trie at 100 to 140 meters and they are dangerouse at this distance

    Some hit the point some are  more meters from point of aim

    The beast are wörser at longrange they can impact 30 meters from aimpoint

    They must start spiraling somewhere at they flightpath

    At 30 meters they are accurate and hard hitters

    Link

    Jorgo
    Participant
    Member

    How much working hours was on your compressor?

     

    Link

    Jorgo
    Participant
    Member

    Looks good in quality but high pricly somewhere  in 800 bucks class

    Link

    Jorgo
    Participant
    Member

    To much shots out of the vital zones in my eyes.

    Video is nice maked but you need to aim the  HL area or the brain for a quick dead of these creatures

    Link

    Jorgo
    Participant
    Member

    As i know Bully is to buy in

    Poland

    Nederlands

    Serbija

    Thats whats what i see on internet

     

     

    Link

    Jorgo
    Participant
    Member

    You can buy the Bully in germany in cal 30 and 35.

    With power restiction of 5.5 fpe

    Thats not a jok

    Link

    Jorgo
    Participant
    Member

    Why you dont give a try to Gmi engineering tool

    This modular tool can swag different lenghts different headsizes different diameters for each caliber

    Tool under 200 dollars

    Cheap press 1 ton 70 dollars

    Wire cutter 40 dollars

    And 1000 dollars stay for next rifle

    Link

    Jorgo
    Participant
    Member

    Yes i have. In 25 with a LW barrel.

    The barrel works with pellets fine the slugs dont want perform like the pellets.

    Finally i have see in my barrel are some loose spots at the, end the blowed skirt have no problems to expand and grip in.

    The slugs have no expading potential in the barrel and in the last 4 inches the fall out with no friction.

    I will fix my barrel issues in oktober and will try my tests again.

    The tool itself is a fine one and good manufactered with many variation options

    The costumer service is good to.

    I would buy a system like these again, i must just fix or buy a barrel that is worked better than that what i owne

     

    Link

    Jorgo
    Participant
    Member

    Chepliki have you tuned the rifle?

    The factory parameters in fpe was 170

    Link

    Jorgo
    Participant
    Member

    Toy cup pistol is what i mean beware to take other primers .

    In case of toycup pistol primers you need a eyeprotection.

    Somethimes when cutting them with a scissor they ignite with a smal flash

    Dont play with your health the cup primers are a way to make this flashpellets more sensitive about soft media( potatos apples tomatos water filled bottles etc.)

    But all is not worth to harm your eyes

    If you do it than safty first otherwise dont do it

    Link

    Jorgo
    Participant
    Member

    Push a slug trough your barrel and you will see if its not uniform in friction, maybe there are looser spots in it.

    A blowed skirt can compensat this looser spots a hard masive slug not, it will pressed a the thigtest barrel spot to his smalest diameter if now comes a looser barrelspot downrange it will loose the grip in the groves and lands.

    Push a slug trough and you will see

    Link

    Jorgo
    Participant
    Member

    In cup pistol ammo ate smal pieces of papers inside.

    Thr are soaked or powdered with a impact sensitive  flashpowder combustion or simulate.

    Put out in of this papers from the cup with a neadle.

    Cut it in half or smaler.

    Place it on the top of pellet.

    Put a smal amount of superglue on it.

    Take care that the paper dont will touch the barrel by firing the pellet.

    A halt or quarter piece is absolut enough

    Link

    Jorgo
    Participant
    Member

    Put half part of a cup pistol primer on the top of your pellet and it will ignite on soft targets like tomatos  or simulare.

    The problem with these is the pellet will not ignite on the optimal position inside the media.

    It depends at cal …speed and the charge of the pellet

    At low speed or energie,

    you dont have a deep penetration in media more  massive fleshwound 4 times bigger than the caliber but not deeper than a inch

    For rats totaly enough

    Link

    Jorgo
    Participant
    Member

    The Hercules was optimized by there new design, its the Bully.

    The Bully is good balanced but in 35 or 45 to weak from the power level without some tuning.

    For the people who playing with the idea to buy a Hercules, the Bully is the better choice from balance and handling.

    Best caliber for that was 30 its in power and accuracy well balanced

    Steelo look for a single shot tray i think someone in the forum make them for the Hatsan pcps

    Link

    Jorgo
    Participant
    Member

    Oh sorry double post 

    Link

    Jorgo
    Participant
    Member

    Have on one a bottle rifle it works very consistent.

    The fillspeed is at beginning very low and will rise up after a few fills.

    Their costumer service is very good if you have somme questions or issues.

Viewing 20 posts - 1 through 20 (of 164 total)