Recent content by JohanG

Sorry, I was offline for a bit. I replaced the O-ring inside the reg and tried to get it back to where it was, but I think it is a little bit lower than where it was. About 120 bar now.

Yes, I pinched the rifle between my knees and used both hands to unscrew the bottle. When the bottle is out you must dryfire once to get the air out of the plenum before you turn the reg clockwise.

Just loosen the pressure gauge a small amount until you can hear air escape. Leave it to drain. You may have to loosen it a bit more during the process. NEVER UNDO IT ALL THE WAY WHILE THERE IS PRESSURE IN THE SYSTEM.

Spilt it where the yellow arrow points. The reg adjustment screw is inside. Mine was leaking by the small hole and I had to replace all the o-rings inside the reg.

The regulator is between the bottle and the rifle. You need to remove the bottle. turn clockwise to reduce or anti clockwise to increase. Only 1/8 of a turn at a time. Re-assemble, refill and test. See page 26 of the manual. https://www.kralarms.com/wp-content/uploads/2023/04/pcp4-eng.pdf

I will really advise to get the bottle version of the Wildcat. I have a .22 compact and whish that I have spent the extra money to get the BT model. The tube just run out of air to quick, last for about 2 magazines before refill needed. Tuned to 33 fpe.

Strelok Pro is alive and well but can currently only be downloaded/ updated from the Huawei App Gallery. https://appgallery.huawei.com/#/app/C104378913

Does it take a CO2 cartridge in the butt?

FX DRS 600 5.5mm.

Hi Bigbuck, That rifle looks gorgeous. Is that a hydro dip or wrap on the rifle?

It stops where the rifling starts to engage the ogive. Perfectly normal.

If you could rewind, would yo rather buy the 600 mm barrel or the 500mm barreled DRS?

Someone has started it already.

One should check the zero before shooting at live quarry.

The tune is written on the picture.