JimD's latest activity
- JOn the advice of @JimD I shot this 30-yard challenge today. Took me about 20 minutes so no rush, with a nice result. I'll be shooting...
- JJimD replied to the thread GX CS2 cylinder head getting hot. Do I care?.I believe GX recommends a maximum of 30 minutes run time which you probably did not exceed. You might want to reduce that but as long...
- JJimD replied to the thread Snowpeak P35X versus P35.My comment on regulator adjustment is not correct. I think you have less than a turn of total adjustment possible on the regulator. I...
- JJimD replied to the thread Snowpeak Need Recommendations for a PCP Airgun for Hunting.".Everybody is entitled to their opinion but for small game, I do not think more than a 25-35 fpe 22 caliber is needed. I have killed...
- JJimD replied to the thread Snowpeak 60 fpe from a P35?.Yes but 8.5mm OD springs seem to be rare. The P35X spring uses 1.3 mm wire but is shorter than the P35 with 1.2mm wire. But 60 fpe...
- JSome of you may remember me discussing trying to get 50 fpe from my 25 caliber P35 before. I have done it but inevitably the next time...
- JJimD replied to the thread Filling Benjamin Marauder w/ compressed air.If I want to fill a gun with it still on the rest I can just put my 15 lb CS2 on the bench and power it with a tool battery. It takes...
- JJimD reacted to Trucker3573's post in the thread Filling Benjamin Marauder w/ compressed air with
Like. For direct filling the marauder go to gx pumps official website and buy the cs2. Under 300, will fill fast, all parts available and... - JOK folks, I have bit the bullet, or actually the pellet. Stopped of at my LGS. Ordered a Benjamin Marauder, 22 cal, synthetic stock...
- JJimD replied to the thread N/A Another newbie looking for advice.I have an Avenger, first generation, and I think it's a good rifle for the price as long as you do not mind it's nearly 4 foot length...
- JJimD replied to the thread Quick question yes or no.I vote Yes. It seems to me that the Red Panda's price is if anything a bit lower than other airguns with similar performance in...
- JI voted yes but I bought used. For some reason I like this barbell of a gun. Only had a week or so but it encourages me to go to the...
- JJimD replied to the thread Googling minimum FPE needed for pellet expansion..I test in wet paper. An old outdoor writer/professional hunter named Finn Aagard recommended it as a reasonable simulation of muscle...
- JJimD replied to the thread new guy to airguns.Most if not all of us are not. The only exception might be somebody only interested in hunting. But I still see investing less than...
- JJimD replied to the thread Ballistics calculations.I agree with bluefax. I like to shoot groups at various distances to check the ballistics program. Often I change the bc a little to...