JimD's latest activity

I respect this is the way many people think of the situation but it isn't my experience. I do not have a Taipan, my closest equivalent...

I'm trying to make this post about the China airguns to see why there ,so run down here on the Nation by several members. I have a Zelos...

Yes, reports are that the Notos is both accurate and dependable. Reports on the trigger are not as positive. It is built by SPA who...

I tried to change the cocking handle on my P35-25 just to see if I could and it eventually loosened up and then I had trouble keeping it...

Moving to a PCP after 2 springers, I was wandering around looking to go down the wrong rabbit hole buying guns and accessories I had no...

Well I got an apparently new scope from Athlon today. I hoped to get it mounted and a few sight in shots at least but the rain arrived...

I got mine today. On my kitchen scale it weighs 2 lbs 10 ounces with magnets but without the outlet hose. Seems well made. The holder...

My P35-22 has had no O-rings replaced or other maintenance work. It has had the hammer spring adjusted and the trigger adjusted and an...

If the OP is still researching I will offer my normal recommendation of a P35 but in light of the interest in potentially shooting a hog...

If you can find a 18V to 12V converter rated at least 30 amps you could make a power supply that would use tool batteries. I use...

It's not an issue except I can't get to the site on my laptop, only with my phone. Windows works stupidly on my laptop so it may be the...

You should not need to filter air from you bottle. It should be dry. If it isn't, you are damaging your bottle (the liner is aluminum).

Another factor that would minimize the value of a valve holding air in the filter until a pressure like 1900 psi is the filter will be...

A couple of thoughts on the issues of liners and PMVs . . . lots of bad info out there, much of it spread by one who refers himself an...

A Stoeger Bullshark should make at least 20 fpe in 177. My P35 makes 19 and the barrel on the Bullshark is 40mm longer. The stock...