JimD's latest activity
- JJimD replied to the thread Air Venturi Regulator Creep.I don't know why the gauge moves like this. It could be a real change in pressure and it might be something about how it works. But...
- JJimD replied to the thread Compressor damaging internals.I have some issues with your explanation of risks, Cavedweller, but your recommendations are pretty good in my opinion. I don't fill in...
- JJimD replied to the thread Pellet Preparation.The closest thing to competition I do is the 30 yard challenge. I am not great but I have shot a few 200s, the goal. I've tried most...
- JJimD replied to the thread Vector Optics Veyron 4-16.I used to think my Vector Veyron 6-24 was not as clear as my Athlon Talos 6-24 but I just didn't get the parallax adjusted as well on...
- JJimD replied to the thread Story time grab a beer it’s a long one.I cannot see any purpose in filing or machining a groove in the screw for the one way O-ring. I've replaced those O-rings multiple...
- JYou probably could have cocked the gun and taken the hammer spring pressure off the valve, closing it enough to let you hand pump it up...
- JThat side relieved screw is NOT stock & whomever did it also bypassed the slow fill nature of air moving around the threads of an...
- JJimD replied to the thread What brand CF tank ?.I think you should consider the fill set price when considering the bottle price. I did not. I bought a used, out of date, Scott...
- JJimD replied to the thread Air tank not DOT approved.I don't mind at all DOT publishing regulations for transportation of SCBA tanks. If you brake the valve off a full one it is dangerous...
- JJimD reacted to EPG's post in the thread Benjamin .22 Benjamin Akela "HP" or is it a "Caydela"... with
Like. I did this build yesterday... it turned out great ! Why did I pull apart a good shooting Cayden? It always seemed too loud for the... - JJimD replied to the thread Air tank not DOT approved.You can get to at least a summary of 10CFR49 is you are concerned. It is LONG because it discusses transportation of all hazardous...
- JYou also might want to get rid of all those pcp airguns you have with the uninspected tubes on them that you hold next to your face...
- JJimD replied to the thread Benefits of shrouded barrels?.In the guns I own, I have an original Avenger with a shroud that is mostly for appearance, does very little for sound reduction, and...
- JNoise noise noise. As a side benefit a shroud hides those rinky dinky barrels found on all production air rifles. Coming from PBs I cant...
- JAir stripper and sound. When your shroud becomes part of the chassis, that also makes for a very consistent gun. A gun without a shroud...