Recent content by Jibeji

  1. Jibeji

    Wildcat air bleeder hole

    Hi Chuck, You are right! But that part is missing on mine... :(
  2. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Hehe, lunch time down here. :) OK, I'll count starting at 230 and will tell you. I have asked Huub from Huma to set it to 140 for me. The index is just a little bit over the 140 marking, approx. 1/25"
  3. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    OK for 40 shots, but with what initial pressure?
  4. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Yes, .25 and reg set at 140 bar. Unfortunately I forgot the count the shots with the original reg, and didn't pay attention with the Huma . I'll tell you next time.
  5. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Hi, Just to share some figures with you. In conclusion, I would say that the genuine regulator performs very well (1/4 inch at 100 yards) but the Huma beats it.
  6. Jibeji

    Wildcat air bleeder hole

    Nope...
  7. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Hi guys, Just a quick update. I finally took some time to check the speed with different hammer spring settings and, as usual, you were right! I now got a constant 275 +/- 0.5 m/s (which is around 900 fps) by unscrewing the nut of approximately one turn before its maximum. :) Huma rocks! Chuck...
  8. Jibeji

    Wildcat air bleeder hole

    Hello, I noticed that the brass nut that closes the air bleeder hole must be very tighten to prevent leakage. Would it be a good idea to place an o-ring in the hole? Cheers.
  9. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Hello, First of all, thanks a lot for answering my questions, I really appreciate. Regarding the regulator pressure, I just know it is set to 140 bar because I asked Huub to set it for me. To be totally transparent, I forgot to mention the required pressure in my order, Huub contacted me to ask...
  10. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Hi there, I am a bit disappointed... After having installed the regulator set to 140 bar, I only got around 870 fps with the JSB 25.4gr and the spring nut screwed to its maximum. :(
  11. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    :) Thanks for the tip!
  12. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Damn! I've got another leak. 5 bar per hour... :( I didn't change the O-ring, do you guys think it's mandatory?
  13. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Just an information for those who will play with their regulators, the brass screw used to empty the reservoir should be tighten really strong! My Wildcat was loosing 20 bars in 1 hour, some soapy water on that screw helped my to identify the leak. Image picked on another topic
  14. Jibeji

    HUMA REGULATORS VS. FX REGULATORS FOR WILDCAT & STREAMLINE

    Sure, as soon as the rain stops... :( I have asked Huub to set it to 140 bars.