Jfk742's latest activity

Contain the lead and most of the sound within Pickle barrels. Not good for over 20 ftlbs. Although you can use, a .22, a .177 or .20...

I went in a 1/16 of a turn and the velocity is still low. I want to be around 900-930 fps with the jsb 10.34’s. Current average is...

Yeah they come fairly overhammered :) as long as the setscrew is still grabbing the adjuster you’ll be fine but yeah, could be that the...

I have a bench similar to the DOA, a Caldwell Stable Table. Have had it for about 15 years and used it primarily for ground squirrels...

Welp! We’re getting closer. I’m backed out 3/8 of a turn from factory and my fps with a jsb 10.34 is 877 fps. All pellets i have...

I'll further explain what cavedweller said in detail . . . . In order to understand water in air, you have to first understand that...

To complete the story in one place, I'll add this here as a follow up to my post above - this explains why we need to use active steps...

Read the directions. Turn the parallex adjustment to infinity. Look at the sky off a solid rest or at a solid white wall. Adjust the...

No worries :) hmm reducing plenum might help you to get down further but you’d need a pretty robust insert that can withstand the forces...

Ok, reread your instructions and realized I misunderstood. I definitely found that drop off. With my initial reg adjustment I was in...

This is what the U3 is capable of in terms of ES/SD: Not sure whether you can get that right with a very low reg setting but you...

I tried turning it out until it wouldn’t fire but that only left me with 1.5 threads of engagement in the block, that was before...

Got a new rifle and it came to me doing 1029 fps, ~24.5fpe. I got it to hopefully shoot silhouettes and HFT so it needs to be >20fpe...

No worries, you bought a great gun!! You may be able to get it to 20fpe, my U2 was at 22fpe out of the box with 10gr mk iii slugs. 80b...

What I get for not doing enough research beforehand, lol. I should be able to get into this thing tomorrow, I’ll report my findings in...