Recent content by JefArtist

Yep! I get it. That makes sense. I returned the valve. Besides the PSI issue, There was a problem with the knob, so it's wash. Live and learn. I'm investigating the Air Venturi HPA Jubilee Valve, 7/8 UNF, 4500 PSI...

Rong, in answer to your question does it show PSI pressure while filling the tank (with my Yong Heng) The answer is; YES! It when I reach the desired tank fill and shut off my young Heng and bled the valve and disconnected. That's when the Tank pressure dropped to zero. Nothing . Nada. Yet...

Rong, That's interesting. I did not know that. My experience with tank valves has been otherwise. Below (picture attached)is the valve/gauge I used (the needle did not move to show PSI after the tank was filled. It registered "0" PSI.) Are you positive this type of valve/gauge that I...

John, In my experience, I found all the 4500psi tanks and their 4500psi valves are pretty much DIY (when attaching and operating). It's just a matter of knowing your tank thread size and having familiarity with the several standard 4500psi Tank valves that are out there and not confusing one...

ALTERNATIVE: This adapter (above) will allow you to use two different thread sized valves on the SCOTT AIR TANK UNF 7/8 - 14 UNF Male to M18x1.5 6H Female Adapter For Carbon Fiber Cylinder Conversion

Hi rong1966, I could not find out how to successfully hook up a CGA 347 valve to a NXG2 valve (because of the quick release nipple). I decided to chuck my NXG2 valve all together, It had problems anyway, as it was old and the knob for air flow did not turn smoothly. I've opted...

Hi JSCWARTZLOW, In regards to the NXG2 valve (and using it to fill an air gun or connecting it to a compressor) I'm not sure how the quick release nipple works. Yes, there is a connection (on the NXG2 valve) with threads in which a CGA 347 valve can be connected. That still still doesn't...

Ryan, I agree with you; I'm going to replace the valve entirely (with a new one!). There are several gauge/valves on Ebay (with 7/8-14 UNF threads) that will do the job. This present NXG2 valve has seen 14 years of service. Best to retire it. I'll get better performance (and...

Hi AllThingsAl Good morning! I'm a fellow air gun enthusiast. Like you, I just purchased a Scott air tank (it's a 45 minute tank in great condition) on Ebay. Like your tank, attached to mine is a NXG2 gauge/valve. I'm hoping you found a solution to what type of attachments can be hooked...

Hi Airgun Nation Family (and Everyone on this SCBA Valve thread) I just purchased a "used" 4500 psi Scott Air Tank on Ebay. It's the 45 minute/ 66 cubic foot size. I'm very happy with the tank. My questions to the airgun community center on the NXG2 Gauge that came with this tank (photos...

THANK YOU, JIM!

Hi Jim I just sent you a message through Air Gun Nation about the LCD screen and was wondering, do you have any left. I'll gladly pay the $40 (plus shipping). I'm also a New York resident (Nyack N.Y.) If you have none left, such is life. Best Regards, fellow airgunner, Jef Bretschneider...

No slouch here. The paintjob is thoughtfully executed. A warm---yet---very cool look! 👌👍

1597.45

This is one stylish air pistol!! Dressed with color coordinated earth tones--- Me likes this gun very very much! The Sortie's ugly frog (kissed by a Princess) is transformed into the AP16's handsome Prince